M.A. Ford
M.A. Ford Cyclone Xd 5X Coolant Fed Double Margin Drill 3.50mm
A 3.50 mm coolant-fed double-margin drill designed for 5× diameter deep-hole drilling
- 5x diameter reach for deeper holes
- coolant-fed design clears chips efficiently
- double margin improves hole straightness
- 50 mm diameter suits precise drilling
- M.A. Ford quality for reliable performance
Cyclone Xd 5X Double Margin Drill
The M.A. Ford Cyclone Xd is a coolant-fed drill with a 3.50 mm diameter and double margin geometry. It is built for machinists who need accurate hole production in demanding materials. The five-times diameter flute length supports deeper drilling cycles without pecking. This tool targets professional metalworking shops running CNC equipment.
Coolant-Fed Design and Double Margins
Internal coolant delivery flushes chips from the cutting zone and reduces heat at the drill point. The double margin layout improves guidance and hole straightness while maintaining surface finish. These features work together to extend tool life and lower scrap rates in production runs. Operators gain more predictable performance on tough alloys.
3.50 mm Diameter and 5x Depth Capacity
The 3.50 mm size suits precise hole-making in aerospace, medical and automotive components. Five-times diameter reach handles deep holes in a single pass where shorter drills would require multiple steps. The design runs out when hole depth exceeds the flute length or when material hardness surpasses the substrate limits. Shops needing larger diameters or longer reach must select a different tool.
Highlights
- 5x diameter reach for deeper holes
- coolant-fed design clears chips efficiently
- double margin improves hole straightness
- 50 mm diameter suits precise drilling
- M.A. Ford quality for reliable performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How often should the 3.50mm drill tip be replaced under normal use?
Replace the 3.50mm tip when cutting edges show wear or hole tolerance drifts; coolant-fed design reduces heat wear but inspection intervals depend on material hardness and feed rates.
What limits continuous drilling depth with this 5X tool?
The 5X diameter-to-depth ratio sets the practical limit; chip evacuation and coolant pressure must be maintained beyond that ratio to avoid binding or breakage.
Does the double-margin design run hotter during all-day cycles?
Double margins improve guidance and heat distribution; coolant-fed operation carries heat away from the 3.50mm cutting zone, keeping temperatures stable during extended runs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
