M.A. Ford
M.A. Ford Cyclone XD 3X Solid Double Margin Drill 9.70 mm
A 9.70 mm solid double margin drill designed for precise, stable hole-making
- Solid double margin design improves hole accuracy
- Cyclone XD coating extends tool life in tough materials
- 3X geometry enables faster feed rates
- 70 mm diameter suits precise drilling tasks
- New condition ensures full factory performance
9.70 mm Solid Double Margin Drill
The M.A. Ford Cyclone XD 3X is a solid carbide drill with a 9.70 mm diameter and double margin geometry. It is designed for high-performance drilling in automotive and industrial workshops. The 3X length suits short-hole applications where rigidity and hole accuracy are required. This accessory fits standard drill chucks and CNC tool holders.
Installation and common issues
Secure the drill in a precision collet or hydraulic chuck to minimise runout. Use the correct coolant pressure and feed rate for the workpiece material to prevent premature wear. The most common problems are chipping on the cutting lips caused by excessive vibration and margin damage from insufficient lubrication during deep cuts.
Pre-order checks
Verify that your machine spindle accepts the drill shank diameter and that the tool holder provides adequate clamping force. Confirm the workpiece material matches the drill’s recommended cutting parameters. Ensure your coolant system can deliver flow to the cutting zone. California Proposition 65 warnings apply to this product.
Highlights
- Solid double margin design improves hole accuracy
- Cyclone XD coating extends tool life in tough materials
- 3X geometry enables faster feed rates
- 70 mm diameter suits precise drilling tasks
- New condition ensures full factory performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I confirm the 9.70 mm Cyclone XD drill is cutting correctly after setup?
Check that the double margin design produces straight, oversize-free holes in the workpiece and that the drill runs without excessive vibration or chatter.
What comes in the box with the CXDSS 0970AP and what must I supply separately?
The box contains the 9.70 mm solid carbide drill only; you must provide a compatible tool holder, coolant supply and the workpiece material.
Which Cyclone XD version should I choose for a 9.70 mm hole?
Select the CXDSS 0970AP model, which is the 3X solid double margin drill specifically made for a 9.70 mm diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
