M.A. Ford
M.A. Ford Cyclone Xd 3X Coolant Fed Double Margin Drill 6.10 mm
Coolant-fed double-margin drill cuts 6.10 mm holes with 3X diameter depth capacity
- 10 mm diameter suits precise hole sizes
- 3X coolant-fed design improves chip evacuation
- double margin construction enhances hole straightness
- M.A. Ford brand signals professional-grade tooling
- California Prop 65 warning informs safe handling
Cyclone Xd 6.10 mm Coolant-Fed Drill
This M.A. Ford Cyclone Xd drill is a 6.10 mm solid-carbide tool with internal coolant feed and a double-margin design. It targets machine shops and production cells that need precise, deep holes in tough alloys. The 3× diameter flute length supports stable chip evacuation in steel, stainless steel and high-temperature alloys.
For high-precision drilling.
The double margins and through-coolant channels suit CNC operators who hold tight diameter tolerances and need reliable cooling at depth. Hand-held drilling, soft materials or shallow-hole jobs will not use the geometry or coolant capability. Buyers who want a larger diameter or a longer flute length should look at a different size in the range.
6.10 mm diameter decides fit
The cutting diameter is exactly 6.10 mm, so the hole size and tool-holder clearance are fixed by that figure. Verify the spindle interface and coolant-pressure capability of your machine before ordering. The Prop 65 notice also applies to this item.
Highlights
- 10 mm diameter suits precise hole sizes
- 3X coolant-fed design improves chip evacuation
- double margin construction enhances hole straightness
- M.A. Ford brand signals professional-grade tooling
- California Prop 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 6.10 mm drill fit my existing 6 mm collet?
The 6.10 mm shank is slightly larger than a standard 6 mm collet and will not seat correctly in it. Use a collet or holder sized for 6.10 mm.
How can I verify coolant is flowing through the drill after installation?
Start the machine at low speed and watch for a steady stream exiting the two coolant holes at the drill tip. No flow means a blockage or loose connection.
Does the box include collets or coolant fittings?
The package contains only the Cyclone Xd 6.10 mm drill. Collets, holders and coolant-line fittings are sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
