M.A. Ford
M.A. Ford Cyclone Xd 3X Coolant Fed Double Margin Drill 27/64
Coolant-fed double-margin drill bit sized 27/64 for efficient chip evacuation
- Coolant-fed design clears chips efficiently during deep drilling
- 3X diameter capability handles deeper holes in a single pass
- Double margin construction improves hole accuracy and surface finish
- 27/64 inch diameter suits precise fractional sizing needs
- New M.A. Ford tooling delivers reliable performance for demanding applications
Cyclone Xd 3X coolant-fed drill
The M.A. Ford Cyclone Xd 3X is a coolant-fed double margin drill sized at 27/64 inch. It targets machinists who need through-tool coolant delivery for chip evacuation in deep holes. The double margin design supports hole straightness and surface finish in production environments. Buyers needing non-coolant drills or larger diameters will look elsewhere.
Sustained load behaviour
Through-tool coolant flow removes heat at the cutting zone during extended drilling cycles. The double margins maintain alignment as the drill advances deeper into the workpiece. This combination reduces thermal expansion effects that degrade tolerance on long runs. Shops without high-pressure coolant systems cannot exploit the design fully.
Practical limits of the interface
The 27/64 inch shank fits standard holders matching that fractional size. Coolant delivery requires a machine spindle and holder rated for through-spindle pressure. Proposition 65 warnings note chemicals linked to cancer and reproductive harm. Users must verify holder compatibility and local safety regulations before installation.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- 3X diameter capability handles deeper holes in a single pass
- Double margin construction improves hole accuracy and surface finish
- 27/64 inch diameter suits precise fractional sizing needs
- New M.A. Ford tooling delivers reliable performance for demanding applications
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the coolant-fed design of the CXDCS4219AP reduce heat buildup during continuous drilling?
The coolant-fed channels deliver fluid directly to the cutting zone, removing heat at the source during extended drilling cycles.
What tool holder or machine spindle is required for the 27/64 inch shank?
A holder or spindle that accepts a 27/64 inch diameter shank is needed to secure the drill.
Can the double-margin CXDCS4219AP maintain hole straightness in a worn drill bushing?
The double-margin design guides the drill at two contact points, improving alignment even when the bushing shows wear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
