M.A. Ford
M.A. Ford Cyclone Xd 3X Coolant Fed Double Margin Drill 15/32
Coolant-fed double-margin drill in 15/32 size for efficient chip evacuation
- Cyclone Xd design drills three diameters deep
- Coolant-fed operation clears chips from the cut
- Double-margin geometry guides the drill straighter
- 15/32 inch diameter fits the stated hole size
- California Proposition 65 warning lists cancer and reproductive risks
Precision drilling tool
The M.A. Ford Cyclone Xd 3X Coolant Fed Double Margin Drill in 15/32 size is engineered for machinists and maintenance professionals who need accurate hole-making in demanding materials. Its specialised geometry supports consistent performance during production runs and repair work alike.
Double-margin stability
A double-margin design guides the drill through the workpiece to improve straightness and surface finish while reducing vibration. Internal coolant channels deliver fluid directly to the cutting zone, extending tool life and helping manage heat during deep or continuous cuts.
15/32 inch diameter
This drill cuts a 15/32 inch hole, making it the correct choice only when that exact fractional size is specified on the drawing or bill of materials. Buyers who need a different diameter, a non-coolant-fed variant, or a metric equivalent should select another tool.
Highlights
- Cyclone Xd design drills three diameters deep
- Coolant-fed operation clears chips from the cut
- Double-margin geometry guides the drill straighter
- 15/32 inch diameter fits the stated hole size
- California Proposition 65 warning lists cancer and reproductive risks
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank standard does the CXDCS4688AP use and what maximum drill depth does the 3X design allow?
The drill uses a standard shank for coolant-fed holders and the 3X designation indicates a maximum drilling depth of three times the 15/32 inch diameter.
What holder or spindle interface is required to mount the 15/32 inch Cyclone Xd drill?
A coolant-fed tool holder or spindle with through-coolant capability and a matching shank size is required for proper mounting.
How is the CXDCS4688AP installed in a CNC machine and what alignment step is often missed?
Insert the drill into a clean coolant-fed holder, tighten to the holder's specified torque, then verify coolant flows through both margin holes before starting the cycle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
