M.A. Ford
M.A. Ford Cyclone Xd 3X Coolant Fed Double Margin Drill 1/4
Coolant-fed double-margin drill for 1/4 inch holes, 3× diameter depth, Prop 65 listed
- Cyclone Xd design for high-performance drilling
- 3X coolant-fed system improves chip evacuation
- Double margin construction enhances hole accuracy
- 1/4 inch diameter suits precision applications
- New condition ensures full factory performance
Drill size and coolant feed
The M.A. Ford Cyclone Xd drill has a 1/4 inch diameter and uses internal coolant channels. It is built for machining operations that need chip evacuation through the tool. The double margin design supports hole straightness during the cut. This tool targets professional metalworking shops.
Suited for high-precision holes
Shops that need accurate holes in tough alloys with through-coolant capability will find this drill suitable. Buyers who need a larger diameter or a non-coolant design should look at something else. The 3X length is not intended for deep-hole applications beyond its flute reach. Hand-held drilling is not the intended use.
California Proposition 65 notice
This product carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm. The notice references code 65 and applies to the item as supplied. Buyers who require documentation free of such substances must verify compliance before purchase. The warning is a regulatory requirement for this listing.
Highlights
- Cyclone Xd design for high-performance drilling
- 3X coolant-fed system improves chip evacuation
- Double margin construction enhances hole accuracy
- 1/4 inch diameter suits precision applications
- New condition ensures full factory performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How deep can the 1/4 inch Cyclone Xd 3X drill go before chip evacuation becomes the limiting factor?
The 3X diameter design with coolant feed and double margins supports stable drilling to roughly three times the diameter, so chip removal stays effective within that depth range.
What heat or noise level should I expect when running this coolant-fed drill continuously in production?
Coolant delivery through the tool flushes heat from the cutting zone, keeping tip temperature lower and reducing the high-pitched squeal common in dry deep-hole drilling.
Which tool-holder interface does the CXDCS2500AP shank require for secure clamping?
The straight round shank fits standard ER collets, Weldon flats or hydraulic holders that accept a 1/4 inch diameter, so existing CNC tooling can clamp it directly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
