M.A. Ford
M.A. Ford CXDSS 1120AP Cyclone Xd 3X Double Margin Drill 11.20 mm
Solid double-margin drill cuts 11.20 mm holes with 3× diameter depth capability
- Solid double-margin design improves hole accuracy
- Cyclone Xd 3X construction extends tool life
- 20 mm diameter fits precise drilling tasks
- M.A. Ford manufacturing ensures consistent quality
- California Proposition 65 compliance disclosed for safety awareness
Cyclone Xd 3X Double Margin Drill
The M.A. Ford CXDSS 1120AP is a solid carbide drill designed for high-performance drilling in demanding materials. Its double margin design improves hole straightness and surface finish while providing enhanced stability during deep-hole operations. This 11.20 mm tool suits professional machinists and maintenance teams requiring precise, repeatable results in production environments.
Thermals noise and power draw
As a solid carbide cutting tool, the drill generates heat at the cutting interface which is managed through proper coolant application and recommended cutting parameters. The double margin construction reduces vibration and friction compared to single margin designs, contributing to lower cutting forces and improved chip evacuation. Power consumption depends entirely on the machine tool spindle and the specific workpiece material being drilled.
Bundled accessories and software
The product ships as a single cutting tool without bundled accessories, coolant systems or software packages. Users must supply appropriate tool holders, collets or chucks compatible with their machine spindle interface. The California Proposition 65 notice indicates the tool contains chemicals known to cause cancer and reproductive harm, requiring standard workshop safety practices during handling and machining operations.
Highlights
- Solid double-margin design improves hole accuracy
- Cyclone Xd 3X construction extends tool life
- 20 mm diameter fits precise drilling tasks
- M.A. Ford manufacturing ensures consistent quality
- California Proposition 65 compliance disclosed for safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 11.20 mm Cyclone Xd drill in my drill press and what step is often missed?
Insert the straight shank fully into the chuck, tighten evenly on all three jaws, and verify run-out before cutting; the step most often missed is checking concentricity after clamping.
What maintenance or replacement will the CXDSS 1120AP need during its service life?
The solid carbide body cannot be resharpened by hand; when the cutting edges dull or the double margins show wear, replace the entire 11.20 mm drill.
What limit appears first when the 11.20 mm drill runs continuously in tough material?
Heat buildup at the cutting edges is the first limiting factor; without adequate coolant flow the carbide will lose hardness faster than the margins wear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
