M.A. Ford
M.A. Ford CXDSS 1090AP Cyclone Xd 3X Double Margin Drill 10.90 mm
A 10.90 mm solid double-margin drill designed for 3× diameter drilling depth
- 90 mm diameter suits precise drilling tasks
- Double margin design improves hole straightness
- Cyclone Xd 3X geometry enhances chip evacuation
- Solid carbide construction resists wear in tough materials
- M.A. Ford quality trusted by professional machinists
10.90 mm Cyclone Xd drill for precision holes
The M.A. Ford CXDSS 1090AP is a 10.90 mm solid carbide drill with a 3X length and double margin design. It targets machinists who need accurate hole placement and improved surface finish in a single pass. The double margins guide the tool to reduce runout and maintain diameter consistency. This new accessory suits CNC and manual drilling operations.
Drilling depth limited to three times diameter
The 3X length specification restricts practical drilling depth to roughly three times the 10.90 mm diameter. Deeper holes require peck cycles or a longer series tool not covered by this model. The double margin geometry improves stability within this range but does not extend the depth capability. Coolant pressure and chip evacuation become critical at the limit.
Check holder runout and coolant supply before use
Verify that your tool holder runs true to prevent premature margin wear on the 10.90 mm shank. Ensure the machine spindle can deliver sufficient coolant pressure for chip removal at this diameter. Confirm the workpiece material suits solid carbide tooling without requiring a coated or geometry-specific alternative. California Proposition 65 warnings apply to this product.
Highlights
- 90 mm diameter suits precise drilling tasks
- Double margin design improves hole straightness
- Cyclone Xd 3X geometry enhances chip evacuation
- Solid carbide construction resists wear in tough materials
- M.A. Ford quality trusted by professional machinists
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Which Cyclone Xd 3X double margin drill diameter should I select for a 10.90 mm hole?
The 10.90 mm variant is the exact match; the part number 1090AP corresponds to that single diameter.
What does the 3X designation mean for drilling performance in a machine?
It indicates a three-times-diameter flute length, giving deeper hole reach in a single pass.
How does the double margin design affect the drill's guidance in the workpiece?
Two margins instead of one improve hole straightness and finish by stabilising the tool throughout the cut.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
