M.A. Ford
M.A. Ford CXDSS 0890AP Cyclone Xd 3X Double Margin Drill 8.90 mm
Solid double-margin drill bit creates precise 8.90 mm holes with three-times diameter depth capability
- Precision drilling with 3X solid double margin design
- 90 mm diameter suits exact hole requirements
- Cyclone Xd geometry improves chip evacuation
- M.A. Ford brand trusted by professionals
- California Proposition 65 chemical warning applies
Drill specification and intended use
The M.A. Ford CXDSS 0890AP Cyclone Xd is an 8.90 mm solid double-margin drill designed for precision hole-making. It targets professional machinists and maintenance engineers who require accurate diameter control in production or repair environments. The tool is supplied new and falls within the power and pneumatic accessories category. Buyers who need a different diameter or a non-double-margin geometry should select another product.
Behaviour under sustained load
The double-margin design provides two guiding lands that improve stability and hole straightness during extended cutting cycles. This geometry helps maintain consistent diameter tolerance and surface finish when the drill operates continuously at recommended feeds and speeds. The solid construction resists deflection under load, reducing the risk of wander in deeper holes. No specific coating or substrate technology is detailed in the supplied data.
Installation notes and common issues
The 8.90 mm shank fits standard collets, chucks or tool holders sized for that diameter; verify holder compatibility before use. Ensure the workpiece is rigidly clamped and that coolant or lubrication appropriate to the material is applied to prevent premature wear. Misalignment or insufficient coolant are the most frequent causes of oversize holes or margin damage. The product carries California Proposition 65 warnings for cancer and reproductive harm, so handle with appropriate personal protective equipment.
Highlights
- Precision drilling with 3X solid double margin design
- 90 mm diameter suits exact hole requirements
- Cyclone Xd geometry improves chip evacuation
- M.A. Ford brand trusted by professionals
- California Proposition 65 chemical warning applies
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the 8.90 mm Cyclone Xd drill generate during continuous drilling?
The solid carbide construction and double margin design of the 8.90 mm drill dissipate heat efficiently, reducing thermal buildup during extended use in steel or cast iron.
What tool holder or chuck is required to run the 8.90 mm drill?
A standard drill chuck or collet that accepts an 8.90 mm shank is needed; the drill has no proprietary interface.
Will the 8.90 mm Cyclone Xd drill work in an older pillar drill with limited runout control?
The double margin geometry improves guidance and stability, helping the 8.90 mm drill perform reliably even on machines with moderate spindle runout.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
