M.A. Ford
M.A. Ford CXDSR 1180AP Cyclone Xd 5X Double Margin Drill 11.80 mm
Solid double-margin drill creates 11.80 mm holes with five-times diameter reach
- 80 mm diameter for precise hole sizing
- 5X drilling depth capability extends reach
- Double margin design improves hole straightness
- Cyclone Xd geometry enhances chip evacuation
- M.A. Ford quality ensures reliable performance
11.80 mm Double Margin Drill
The M.A. Ford CXDSR 1180AP Cyclone Xd is a solid carbide drill with a 5X diameter drilling depth and double margin geometry. It is designed for machinists who need accurate hole placement and improved surface finish in deep hole applications. The 11.80 mm diameter suits precise metalworking tasks.
Straight Shank Installation
The drill fits standard tool holders or collets matching the 11.80 mm shank diameter. Secure clamping prevents runout during high speed cycles. Vibration or oversized holes usually indicate insufficient holder grip or incorrect feed rates for the material.
5X Diameter Drilling Depth
This drill reaches a depth of five times its 11.80 mm diameter in a single pass. Buyers needing deeper holes without pecking cycles should verify this ratio meets their requirement. It is not for operations requiring through coolant channels or longer flute lengths.
Highlights
- 80 mm diameter for precise hole sizing
- 5X drilling depth capability extends reach
- Double margin design improves hole straightness
- Cyclone Xd geometry enhances chip evacuation
- M.A. Ford quality ensures reliable performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I confirm the 11.80 mm Cyclone Xd 5X drill is cutting correctly after installation?
Check that the double margin produces a straight, round hole at the 11.80 mm diameter with consistent chip evacuation and no wandering during the drilling cycle.
What does the M.A. Ford CXDSR 1180AP package contain and what must I source separately?
The box contains the 11.80 mm solid double margin drill; a compatible tool holder, coolant supply and workpiece clamping are not included and must be purchased separately.
Which Cyclone Xd 5X version should I select for an 11.80 mm hole in my application?
Choose the CXDSR 1180AP model when the required finished hole diameter is exactly 11.80 mm; other diameters in the series are listed separately for different hole sizes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
