M.A. Ford
M.A. Ford CXDSR 0480AP Cyclone Xd 5X Double Margin Drill 4.80 mm
A 4.80 mm solid double-margin drill designed for 5× diameter drilling depth
- 80 mm diameter drills precise holes in tough materials
- 5X diameter reach accesses deep cavities without tool changes
- Double margin design centres the drill for straighter holes
- Solid carbide construction resists wear at high cutting speeds
- Cyclone Xd geometry improves chip evacuation during deep drilling
Product identity
The M.A. Ford CXDSR 0480AP Cyclone Xd is a 5X solid double margin drill with a 4.80 mm cutting diameter. It is built for machine shops and maintenance teams that need accurate hole-making in tough materials. The tool ships new directly from the manufacturer.
Design advantage
The double margin design adds a second land that guides the drill and improves hole straightness and surface finish. The 5X length-to-diameter ratio allows deeper drilling in a single pass without pecking cycles. These features reduce cycle time and tool wear on production runs.
Best fit and limits
This drill suits operators running CNC or rigid manual machines where coolant delivery and spindle rigidity are adequate. It is not intended for hand-held drilling, low-rigidity setups, or applications that require a different diameter or length. Buyers needing other sizes should select the matching variant.
Highlights
- 80 mm diameter drills precise holes in tough materials
- 5X diameter reach accesses deep cavities without tool changes
- Double margin design centres the drill for straighter holes
- Solid carbide construction resists wear at high cutting speeds
- Cyclone Xd geometry improves chip evacuation during deep drilling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
When should the 4.80 mm double-margin drill be replaced?
Replace it when the cutting edges show visible wear or the margins no longer guide the hole accurately, as dull edges increase thrust force and reduce hole quality.
What limits continuous drilling with this 5X solid carbide tool?
Heat buildup in the workpiece and drill flank wear become the limiting factors during sustained high-speed drilling cycles.
How much noise and heat does the 4.80 mm Cyclone Xd generate in all-day production?
Expect typical solid-carbide drilling noise levels and localized heat at the cutting zone; use coolant or through-tool lubrication to manage temperature during extended runs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
