M.A. Ford
M.A. Ford CXDCS 0780AP Cyclone Xd 7.80 mm coolant-fed drill
A 7.80 mm coolant-fed double-margin drill for efficient chip evacuation
- 80 mm diameter suits precision drilling tasks
- Coolant-fed design delivers lubrication to the cutting zone
- Double margin construction improves hole straightness
- Cyclone Xd geometry supports 3X drilling performance
- New condition ensures full factory specification
Purpose and user
The M.A. Ford CXDCS 0780AP Cyclone Xd is a 7.80 mm coolant-fed drill designed for machining operations that require through-tool coolant delivery. It targets professional machinists and production shops working with materials that demand consistent chip evacuation and thermal control during deep-hole drilling cycles.
Sustained-load behaviour
The double-margin design supports hole straightness and surface finish when the tool runs continuously at 3X diameter depth. Coolant fed through the body flushes chips from the cutting zone, reducing heat buildup and preventing chip packing that can stall the spindle or damage the workpiece during long, uninterrupted cuts.
Installation notes
The drill fits standard holders for 7.80 mm shank tools; no proprietary clamping system is required. The main risk is running without adequate coolant pressure or filtration, which starves the through-channels and leads to premature wear or catastrophic breakage. Verify machine coolant capacity before committing to a deep-hole program.
Highlights
- 80 mm diameter suits precision drilling tasks
- Coolant-fed design delivers lubrication to the cutting zone
- Double margin construction improves hole straightness
- Cyclone Xd geometry supports 3X drilling performance
- New condition ensures full factory specification
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the 7.80 mm drill generate during continuous use?
The drill produces standard cutting heat for a 7.80 mm tool; its internal coolant channels carry fluid directly to the cutting edges to manage temperature during extended operation.
What machine setup is required to use the coolant-fed feature on this drill?
You need a machine spindle or holder with through-coolant capability and a sealed connection that can deliver fluid into the drill's internal passages at the required pressure.
Will the 7.80 mm shank fit my existing tool holders?
The drill has a 7.80 mm cylindrical shank; it fits standard collets, hydraulic chucks or shrink-fit holders sized for that exact diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
