M.A. Ford
M.A. Ford CXDCS 0650AP Cyclone Xd 6.50 mm Coolant-Fed Double Margin Drill
A 6.50 mm coolant-fed double-margin drill designed for 3× diameter drilling depth
- 50 mm diameter matches precise hole requirements
- Coolant-fed design removes heat during deep drilling
- Double margin construction improves hole straightness and finish
- Cyclone Xd geometry increases material removal rate
- New condition ensures full factory performance from first use
6.50 mm coolant-fed drill bit
The M.A. Ford Cyclone Xd 0650AP is a solid-carbide drill with a 6.50 mm diameter and a 3× diameter flute length. It is built for production drilling in steel, stainless steel and high-temperature alloys where through-coolant delivery is available. The double-margin design improves hole straightness and surface finish in deep-hole applications.
Sustained cutting performance
Continuous coolant flow through the tool flushes chips from the flute and cools the cutting edges during extended drilling cycles. This reduces thermal buildup and prevents chip packing that can cause tool breakage or hole deviation. The geometry maintains consistent chip formation across the full 3× depth without peck cycles.
Shank and mounting implications
The cylindrical shank fits standard ER collets, hydraulic holders and shrink-fit chucks used on CNC machining centres. Coolant enters through the shank, so the holder must provide a sealed through-coolant connection. The tool is supplied new and carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.
Highlights
- 50 mm diameter matches precise hole requirements
- Coolant-fed design removes heat during deep drilling
- Double margin construction improves hole straightness and finish
- Cyclone Xd geometry increases material removal rate
- New condition ensures full factory performance from first use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the 6.50 mm double-margin design run hotter during continuous coolant-fed drilling?
The double-margin geometry and through-coolant channels are engineered to evacuate heat and chips efficiently during extended 3×D drilling cycles.
What toolholder or machine interface is required to run this 6.50 mm coolant-fed drill?
A standard 6.50 mm shank-compatible holder with internal coolant supply is needed; the drill is designed for CNC or milling centres equipped for through-spindle coolant.
Will this 6.50 mm Cyclone Xd drill work in an older CNC that only provides external flood coolant?
The drill relies on through-tool coolant delivery for chip evacuation and cooling; external flood coolant alone will not provide the required internal flow.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
