M.A. Ford
M.A. Ford CXDCS 0640AP Cyclone Xd 6.40 mm Coolant Fed Double Margin Drill
A 6.40 mm coolant-fed double-margin drill for precise deep-hole drilling
- Coolant-fed design improves chip evacuation during deep drilling
- Double-margin construction enhances hole straightness and surface finish
- Cyclone Xd geometry optimised for 3× diameter drilling depth
- 40 mm diameter suits precise metric hole-making
- New M.A. Ford drill ready for immediate workshop use
Cyclone Xd 6.40 mm Coolant Fed Drill
This drill is a precision cutting tool built for professional machining applications. It targets manufacturers and machinists who require accurate hole production in demanding materials. The double margin design supports improved hole straightness and surface finish. It is sold new and ships directly from the manufacturer.
Coolant Fed Double Margin Thermal Management
Internal coolant channels deliver cutting fluid directly to the cutting zone during operation. This design manages heat generation at the drill point and along the flutes. Effective cooling reduces thermal expansion in both the tool and workpiece. The double margins provide stable guidance that minimises friction-induced temperature spikes.
Sustained Load Performance in Deep Holes
The 3X diameter capability allows for deeper drilling cycles without Peck cycles interrupting the cut. Continuous coolant flow evacuates chips efficiently during extended operations. Double margins maintain alignment as the drill penetrates further into the material. This stability prevents drift and ensures consistent diameter tolerance throughout the hole depth.
Highlights
- Coolant-fed design improves chip evacuation during deep drilling
- Double-margin construction enhances hole straightness and surface finish
- Cyclone Xd geometry optimised for 3× diameter drilling depth
- 40 mm diameter suits precise metric hole-making
- New M.A. Ford drill ready for immediate workshop use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 6.40 mm coolant-fed double margin drill and what step is commonly missed?
Mount the drill in a compatible holder with through-coolant capability, then connect the coolant supply before starting the spindle; the step often missed is verifying coolant flow reaches the cutting edges at full pressure.
What maintenance or replacement will the 6.40 mm Cyclone Xd drill need later?
Inspect the double margins and cutting lips after each job; resharpen when wear reaches the margin width or replace the drill if corner breakdown or chipping appears on the 6.40 mm diameter.
What limit appears first on the 6.40 mm coolant-fed drill under sustained use?
The 6.40 mm diameter and double-margin geometry concentrate heat at the margins, so margin wear or thermal cracking typically limits tool life before the coolant-fed design loses effectiveness.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
