M.A. Ford
M.A. Ford CXDCS 0590AP Cyclone Xd 5.90 mm coolant-fed drill
A 5.90 mm coolant-fed double-margin drill for high-efficiency chip evacuation
- Coolant-fed design evacuates chips for cleaner holes
- 90 mm diameter matches precise drilling specs
- Double-margin construction guides the bit for straighter cuts
- Cyclone Xd geometry reduces thrust force during operation
- New condition ensures full factory performance from first use
5.90 mm Coolant-Fed Drill
The M.A. Ford CXDCS 0590AP Cyclone Xd is a 5.90 mm solid-carbide drill with internal coolant channels and a double-margin design. It is built for machine shops and production lines that need accurate holes in tough alloys. The 3× diameter flute length supports efficient chip evacuation in deep-hole work.
Who should choose another tool
This drill is not for hand-held drilling or for jobs that require a larger diameter than 5.90 mm. Buyers who need a non-coolant geometry or a different flute length should look at other series. It is also unsuitable for materials that demand a specialised coating not listed here.
5.90 mm cutting diameter
The 5.90 mm diameter is the single specification that determines fit for a given hole size. Match this figure exactly to the drawing or tolerance requirement before ordering. The double-margin layout and coolant feed support straightness and tool life in the intended application.
Highlights
- Coolant-fed design evacuates chips for cleaner holes
- 90 mm diameter matches precise drilling specs
- Double-margin construction guides the bit for straighter cuts
- Cyclone Xd geometry reduces thrust force during operation
- New condition ensures full factory performance from first use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 5.90 mm coolant-fed drill fit the same collets as my existing 6 mm shank tools?
The 5.90 mm diameter is smaller than a 6 mm shank, so it will not seat in collets sized for 6 mm; use a collet or holder made for 5.90 mm.
How can I confirm the Cyclone Xd double-margin drill is cutting correctly once installed?
Check for a steady coolant flow through the tool, listen for smooth cutting without chatter, and measure hole diameter to verify it matches the 5.90 mm spec.
Does the CXDCS 0590AP come with any collets, holders or coolant fittings in the box?
The product is supplied as the drill only; collets, tool holders and coolant fittings must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
