M.A. Ford
M.A. Ford CXDCS 0500AP Cyclone Xd 5.00 mm drill
Coolant-fed double-margin drill in 5.00 mm diameter for high-performance drilling
- 00 mm diameter suits precise drilling tasks
- 3X coolant-fed design improves chip evacuation
- Double margin construction enhances hole accuracy
- Cyclone Xd series built for demanding applications
- California Proposition 65 warning included for compliance
5.00 mm Cyclone Xd drill
The M.A. Ford CXDCS 0500AP is a solid-carbide drill with a 5.00 mm cutting diameter. It features a 3X coolant-fed design and double-margin construction for hole stability. The tool is supplied new and intended for precision drilling in production environments.
Suited to high-feed CNC operations
Shops running coolant-through spindles on rigid machines will benefit from the through-tool delivery and guided margins. It is not for manual drilling, low-pressure coolant setups or materials that require a different point geometry.
5.00 mm diameter capacity
The drill produces a 5.00 mm hole with the tolerance control expected from double-margin guidance. It reaches its limit when the workpiece thickness exceeds the flute length or when the machine cannot supply the coolant pressure the 3X design demands.
Highlights
- 00 mm diameter suits precise drilling tasks
- 3X coolant-fed design improves chip evacuation
- Double margin construction enhances hole accuracy
- Cyclone Xd series built for demanding applications
- California Proposition 65 warning included for compliance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What machine spindle or tool holder is required to run this 5.00 mm Cyclone Xd drill?
The drill has a straight shank that fits standard ER collets, Weldon flats or hydraulic chucks sized for 5.00 mm tooling on any CNC or milling spindle.
Can I use this coolant-fed drill on an older machining centre that only has external flood coolant?
Yes — the double-margin design still guides the cut with flood coolant, though the internal 3X coolant channel will remain unused unless the spindle supports through-tool delivery.
How do I confirm the drill is cutting correctly once installed?
Listen for a steady cutting sound, watch for consistent chip evacuation and measure the first few holes to verify they hold the 5.00 mm diameter within tolerance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
