M.A. Ford
M.A. Ford CXDCS 0450AP Cyclone Xd 4.50 mm coolant-fed drill
Coolant-fed 4.50 mm double-margin drill delivers efficient chip evacuation in deep holes
- Coolant-fed design clears chips from deep holes
- Double-margin construction keeps 4.50 mm diameter on centre
- 3× flute geometry reduces cutting forces
- Prop 65 notice flags chemical hazards for safety compliance
- M.A. Ford precision grind delivers consistent hole quality
4.50 mm Coolant-Fed Drill
The M.A. Ford Cyclone Xd drill is a 4.50 mm solid-carbide tool designed for high-performance drilling in demanding materials. Its coolant-fed design and double-margin construction target professional machinists and CNC operators who need precise hole quality and extended tool life. This new cutting tool suits production environments where consistent chip evacuation and thermal control are critical.
Double-Margin Build and Coolant Delivery
The double-margin geometry improves hole straightness and surface finish by providing four-point contact during the cut. Internal coolant channels deliver fluid directly to the cutting edges, suppressing heat and flushing chips from deep holes without external flooding. This arrangement reduces cycle-time interruptions and protects both the workpiece and the tool in tough alloys.
3× Diameter Depth Constraint
The drill is rated for drilling depths up to three times its 4.50 mm diameter, limiting its use to relatively shallow holes. Applications requiring deeper penetration will need a longer-series tool or a peck-drilling strategy that the fixed 3× design cannot support. Users must also verify machine-spindle coolant capability, as the internal feed relies on adequate pressure and filtration.
Highlights
- Coolant-fed design clears chips from deep holes
- Double-margin construction keeps 4.50 mm diameter on centre
- 3× flute geometry reduces cutting forces
- Prop 65 notice flags chemical hazards for safety compliance
- M.A. Ford precision grind delivers consistent hole quality
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What drill standard does the 4.50 mm Cyclone Xd follow for coolant-fed operation?
The CXDCS 0450AP is a double-margin drill with internal coolant channels designed for 3× diameter drilling depth in standard machine-tool holders.
What shank dimensions are required to mount this 4.50 mm drill in a tool holder?
The drill uses a standard cylindrical shank matching the 4.50 mm cutting diameter for direct clamping in hydraulic, shrink-fit or collet holders.
How is the coolant-fed drill installed and what step is commonly missed?
Secure the shank in a precision holder, connect the machine’s through-spindle coolant supply, verify seal integrity, then start spindle before feeding — skipping the seal check causes coolant leakage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
