M.A. Ford
M.A. Ford CXDCS 0350AP Cyclone Xd 3.50 mm drill
A 3.50 mm coolant-fed double-margin drill for high-precision holemaking
- 3X coolant-fed design improves chip evacuation
- Double-margin geometry increases hole accuracy
- 50 mm diameter suits precise drilling tasks
- Cyclone Xd series built for demanding applications
- New condition ensures full factory performance
Cyclone Xd 3.50 mm drill
The M.A. Ford Cyclone Xd is a 3.50 mm solid-carbide drill designed for CNC machining centres that supply through-spindle coolant. Its triple-coolant-hole layout and double-margin geometry target high-volume production shops that need consistent hole quality in steels and stainless alloys.
Capacity and headroom
The 3.50 mm diameter suits holes in the 3.5 mm range; the drill will not cover larger bores without a different tool. Three internal coolant channels deliver fluid to the cutting zone, extending tool life in deep-hole work, while the double margins improve guidance and finish. In very hard or abrasive materials the feed window narrows, so cycle times may rise.
Build fit
A through-coolant spindle and holder are required to use the internal channels; flood-coolant-only machines cannot exploit the design. The cylindrical shank fits standard hydraulic, shrink-fit or collet holders, freeing the programmer from special adapters. California Proposition 65 warnings apply to this product.
Highlights
- 3X coolant-fed design improves chip evacuation
- Double-margin geometry increases hole accuracy
- 50 mm diameter suits precise drilling tasks
- Cyclone Xd series built for demanding applications
- New condition ensures full factory performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 3.50 mm Cyclone Xd drill fit the collets and tool holders I already use for 3.5 mm carbide drills?
The 3.50 mm shank matches standard 3.5 mm collets and ER holders, so it installs directly into existing tooling without adapters.
How can I confirm the coolant-fed double-margin design is delivering fluid to the cutting zone during a test run?
Watch for a steady coolant stream exiting the two margin holes at the drill point; consistent flow means the internal channels are clear and pressurised.
Does the box include any coolant fittings or wrenches, or must I supply them separately?
Only the 3.50 mm Cyclone Xd drill is supplied; coolant fittings, collets and setup wrenches are sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
