M.A. Ford
M.A. Ford CXDCR1250AP Cyclone Xd 5X Double Margin Drill 1/8
Coolant-fed double margin drill delivers 5X diameter drilling depth in a single pass
- 5X drilling depth reaches deeper holes in one pass
- Coolant-fed design clears chips for cleaner cuts
- Double-margin geometry improves hole accuracy and finish
- Cyclone Xd coating extends tool life in tough materials
- 1/8 inch diameter suits precision drilling tasks
Cyclone Xd 5X Drill 1/8
The Cyclone Xd 5X is a coolant-fed double-margin drill sized at 1/8 inch for precise hole-making in demanding materials. It suits machinists and fabricators who need consistent chip evacuation and hole accuracy during production runs.
Coolant-fed double-margin design
Internal coolant channels deliver cutting fluid directly to the drill point, reducing heat buildup and extending tool life in deep-hole applications. The double-margin geometry stabilises the drill in the cut, minimising walk and improving finish without additional guide tooling.
Sustained-load behaviour
Under continuous drilling cycles the coolant feed maintains stable tip temperatures, preventing thermal softening that can degrade edge retention. The double margins keep the drill centred through full depth, so hole diameter and surface quality remain repeatable from the first part to the last.
Highlights
- 5X drilling depth reaches deeper holes in one pass
- Coolant-fed design clears chips for cleaner cuts
- Double-margin geometry improves hole accuracy and finish
- Cyclone Xd coating extends tool life in tough materials
- 1/8 inch diameter suits precision drilling tasks
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How deep can the 5X Cyclone Xd drill before chip evacuation becomes the limiting factor?
The 5X diameter design allows drilling up to five times the nominal diameter before chip evacuation typically limits further progress.
How much heat does the double-margin design generate during continuous coolant-fed operation?
Coolant fed through the tool flushes chips and carries heat away, keeping the cutting zone at a stable temperature during extended runs.
What coolant-pressure setup is required for the through-tool delivery to function?
A machine spindle or holder that supplies coolant through the tool at the pressure recommended for 1/8-inch carbide drills is needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
