M.A. Ford
M.A. Ford CXDCR 1950AP Cyclone Xd 19.50 mm drill
19.50 mm coolant-fed double-margin drill designed for high-performance drilling
- 50 mm diameter suits precise hole sizing
- 5× coolant-fed design improves chip evacuation
- Double margin construction enhances hole straightness
- Cyclone Xd geometry supports high feed rates
- New condition ensures full factory performance
19.50 mm coolant-fed drill
The M.A. Ford CXDCR 1950AP Cyclone Xd is a 19.50 mm diameter drill designed for precision holemaking in industrial applications. It suits machinists and maintenance teams who need a dedicated coolant-fed tool for consistent chip evacuation. The double-margin geometry supports hole straightness and surface finish. This item is supplied new.
5X diameter capability
The single specification that defines fit is the 5X coolant-fed length, which determines the maximum drill depth reachable in a single pass. Buyers must verify that their machine spindle and workpiece setup accommodate this length-to-diameter ratio. Shorter or longer reach requirements mean this specific drill will not suit the operation.
Sustained drilling behaviour
Continuous coolant flow through the tool reduces heat buildup during extended cuts, helping maintain dimensional stability over the full 5X depth. The double margins guide the drill steadily, limiting wander as temperature rises. Without adequate coolant pressure the thermal advantage diminishes and tool life drops.
Highlights
- 50 mm diameter suits precise hole sizing
- 5× coolant-fed design improves chip evacuation
- Double margin construction enhances hole straightness
- Cyclone Xd geometry supports high feed rates
- New condition ensures full factory performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 19.50 mm diameter mean for hole size in a real machine?
The 19.50 mm drill produces a hole of that exact diameter when run at proper speed and feed in a rigid setup.
How does the coolant-fed design affect the drilling process?
Internal coolant channels deliver fluid directly to the cutting edges, improving chip evacuation and tool life in deep holes.
What shank style does the CXDCR 1950AP use for mounting?
The drill uses a standard cylindrical shank that fits common hydraulic, shrink-fit or collet holders for CNC machines.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
