M.A. Ford
M.A. Ford CXDCR 1370AP Cyclone Xd 13.70 mm coolant-fed double-margin drill
A 13.70 mm coolant-fed double-margin drill for 5X deep-hole drilling in metal
- 70 mm diameter suits precise hole-making
- Coolant-fed design clears chips for deeper cuts
- Double-margin construction improves hole straightness
- Cyclone Xd geometry extends tool life
- 5× diameter reach handles deep-hole applications
13.70 mm coolant-fed drill
The M.A. Ford CXDCR 1370AP Cyclone Xd is a 13.70 mm diameter drill designed for coolant-fed drilling operations. Its double-margin construction provides enhanced hole straightness and surface finish in demanding materials. This tool targets machinists producing deep holes where consistent coolant delivery is critical. It is not suited for dry machining or applications lacking through-tool coolant supply.
Double-margin stability under load
The double-margin design maintains alignment during extended drilling cycles, reducing wander as the tool penetrates deeper. Coolant channels flush chips continuously, preventing packing that can increase torque and heat in long holes. This geometry supports sustained performance where single-margin drills might deflect. The tool requires a machine spindle capable of delivering coolant at adequate pressure.
Coolant-fed interface constraints
Effective use depends on a coolant-through spindle or holder that matches the drill's internal passages. Insufficient coolant pressure or volume will compromise chip evacuation and tool life in deep-hole drilling. The shank must be held securely in a compatible holder to prevent slippage under cutting forces. Machines without through-spindle coolant cannot utilise this drill as intended.
Highlights
- 70 mm diameter suits precise hole-making
- Coolant-fed design clears chips for deeper cuts
- Double-margin construction improves hole straightness
- Cyclone Xd geometry extends tool life
- 5× diameter reach handles deep-hole applications
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the 13.70 mm drill generate when running continuously in coolant-fed mode?
The coolant-fed design circulates fluid through the tool body, carrying heat away from the cutting zone so the drill stays at a stable temperature during extended cycles.
What machine spindle and coolant system are required to run the 13.70 mm double-margin drill?
A CNC or machining centre with through-spindle coolant delivery and a holder that accepts a 13.70 mm shank is needed to supply fluid at the correct pressure.
Will the 13.70 mm Cyclone Xd drill fit in the same tool changer pockets as my existing 13 mm drills?
The 13.70 mm diameter is slightly larger than a standard 13 mm tool, so pocket spacing and adjacent tool clearance should be verified before loading.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
