M.A. Ford
M.A. Ford CXDCR 1300AP 13.00mm Cyclone Xd 5X Coolant Fed Double Margin Drill
13.00 mm Cyclone Xd 5X coolant-fed double-margin drill for deep-hole precision
- 00 mm diameter drills precise holes
- 5X coolant-fed design improves chip evacuation
- Double margin construction enhances hole straightness
- Cyclone Xd geometry extends tool life
- New condition ensures full factory performance
13.00mm Cyclone Xd 5X Drill
This 13.00mm diameter drill is built for high-performance holemaking in demanding materials. Its double-margin design and coolant-fed architecture support precision and tool life in production environments. The Cyclone Xd 5X geometry targets efficient chip evacuation and stability at depth. It suits machinists and shops running CNC operations that require consistent accuracy.
Upgrade from standard coolant drills
The CXDCR 1300AP replaces conventional coolant-fed drills that lack double-margin guidance or advanced 5X flute geometry. The jump is justified when hole straightness, surface finish or tool longevity on tough alloys become limiting factors. It addresses vibration and chip-packing issues common with single-margin tools at similar diameters. Shops seeing premature wear or wandering on deep holes gain measurable improvement.
Installation and common issues
The drill fits standard toolholders matching its shank specification; no proprietary interface is required. Coolant delivery must be aligned and pressurised correctly to realise the 5X design benefits. The most frequent problem is insufficient coolant pressure or misdirected flow, which negates the double-margin advantage and leads to chip welding. Verify machine spindle runout and holder rigidity before first use.
Highlights
- 00 mm diameter drills precise holes
- 5X coolant-fed design improves chip evacuation
- Double margin construction enhances hole straightness
- Cyclone Xd geometry extends tool life
- New condition ensures full factory performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank size does the 13.00 mm Cyclone Xd drill need for the tool holder?
The drill has a 13.00 mm diameter; use a holder or collet that matches this shank size exactly for secure clamping.
How do I connect coolant to the CXDCR 1300AP and what step is often missed?
Attach the coolant supply to the drill's through-tool ports and verify flow reaches both cutting edges before starting the cut.
When should the double margins on this 5X drill be inspected or the tool replaced?
Inspect margins after each job; replace the drill when margin wear reduces guidance or when flank wear reaches the supplier's wear limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
