M.A. Ford
M.A. Ford CXDCR 1060AP 10.60 mm Cyclone Xd 5X Coolant Fed Double Margin Drill
A 10.60 mm Cyclone Xd 5X coolant-fed double-margin drill for high-precision drilling
- 60 mm diameter matches precise hole requirements
- 5× flute length enables deeper drilling in one pass
- Coolant-fed design clears chips and reduces heat
- Double-margin construction improves hole straightness and finish
- Cyclone Xd geometry extends tool life in tough materials
10.60 mm Cyclone Xd Drill
The M.A. Ford CXDCR 1060AP is a 10.60 mm solid carbide drill designed for high-performance holemaking. It targets machinists and manufacturing engineers who require precise, deep-hole drilling capability in demanding materials. The tool suits production environments where coolant-fed operation and extended tool life are critical requirements.
Sustained Load Behaviour
The Cyclone Xd 5X geometry combines a double margin design with internal coolant delivery to maintain stability during continuous drilling cycles. This configuration controls chip evacuation and heat buildup at depth, reducing wander and preserving hole straightness over long production runs. The carbide substrate resists wear under steady-state cutting temperatures.
5X Diameter Drilling Depth
The defining specification is the 5X diameter-to-depth ratio, enabling holes up to five times the 10.60 mm diameter in a single pass. This reach eliminates secondary operations for deep-hole applications. Buyers needing shorter or significantly longer depth-to-diameter ratios should select a different series.
Highlights
- 60 mm diameter matches precise hole requirements
- 5× flute length enables deeper drilling in one pass
- Coolant-fed design clears chips and reduces heat
- Double-margin construction improves hole straightness and finish
- Cyclone Xd geometry extends tool life in tough materials
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the 10.60 mm drill generate noticeable heat or noise during continuous coolant-fed operation?
The Cyclone Xd 5X design uses internal coolant channels to manage temperature at the cutting zone, reducing thermal buildup and keeping acoustic levels low during extended drilling cycles.
What toolholder or machine spindle is required to run this 1060AP double-margin drill?
A compatible coolant-through holder with a matching shank interface is needed to supply fluid through the drill's internal passages and maintain the double-margin guidance.
Will this 10.60 mm Cyclone Xd drill work reliably in an older CNC lathe with lower coolant pressure?
The 5X coolant-fed geometry is engineered for efficient chip evacuation even at moderate pressures, though performance improves with higher flow rates typical of newer machining centres.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
