M.A. Ford
M.A. Ford CXDCR 1010AP Cyclone Xd 5X Coolant Fed Drill 10.10mm
Coolant-fed 10.10 mm drill with double-margin design for improved hole accuracy and chip evacuation
- Coolant-fed design clears chips efficiently during deep drilling
- Double margin construction improves hole accuracy and surface finish
- 5X diameter reach handles deep-hole applications in one pass
- 10 mm cutting diameter suits precise metric hole requirements
- California Proposition 65 warning informs safe handling practices
M.A. Ford CXDCR 1010AP Cyclone Xd Drill
The M.A. Ford CXDCR 1010AP is a solid carbide Cyclone Xd drill designed for high-performance production drilling. It features a 5X diameter flute length with internal coolant feed and double margin construction for improved hole straightness and surface finish. This tool targets machine shops and manufacturers requiring precise, deep-hole capability in tough materials. The 10.10mm diameter suits specific metric hole requirements in automotive and aerospace component machining.
Buyers Needing Other Diameters or Lengths
This drill suits shops running dedicated 10.10mm holes at 5X depth with through-coolant capability. Buyers who need different diameters, flute lengths, or non-coolant-fed tooling cannot use this specific part number. Shops without high-pressure coolant systems or those requiring replaceable-tip indexable drills should evaluate alternative tooling styles. The fixed geometry limits flexibility for varying hole sizes or materials.
10.10mm Diameter 5X Coolant-Fed Specification
The defining specification is the 10.10mm cutting diameter combined with a 5X diameter flute length and internal coolant channels. This geometry dictates the maximum drill depth reachable in a single pass and the required machine spindle coolant pressure. Verifying the exact 10.10mm size against the engineering drawing is essential before ordering, as this dimension cannot be altered. The double margin design supports alignment but requires matching holder precision.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- Double margin construction improves hole accuracy and surface finish
- 5X diameter reach handles deep-hole applications in one pass
- 10 mm cutting diameter suits precise metric hole requirements
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 10.10 mm drill work with my existing 10 mm collet?
The 10.10 mm shank exceeds a standard 10 mm collet capacity, so a 10.10 mm or larger collet is required for proper clamping.
How do I verify the coolant-fed channels are flowing correctly after installation?
Run the machine at low speed with coolant on; visible, steady streams from both margins confirm the internal passages are clear and aligned.
Does the box include the 10.10 mm drill only, or are collets and coolant fittings supplied?
The package contains the CXDCR 1010AP drill itself; collets and coolant-line fittings must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
