M.A. Ford
M.A. Ford CXDCLM1370AP Cyclone Xd 13.70 mm coolant-fed double margin drill
A 13.70 mm coolant-fed double-margin drill designed for 8× diameter deep-hole drilling
- 70 mm diameter matches precise hole specs
- Coolant-fed design clears chips during deep drilling
- Double margin construction keeps hole straight and round
- Cyclone Xd geometry reduces cutting forces
- Prop 65 warning informs safe handling practices
M.A. Ford Cyclone Xd 13.70 mm Drill
The M.A. Ford Cyclone Xd CXDCLM1370AP is a 13.70 mm coolant-fed double margin drill built for high-efficiency drilling. Its 8X design supports aggressive feed rates in demanding production environments. The tool targets professional machinists who need consistent hole quality and extended tool life in difficult materials. This new cutting tool arrives ready for immediate use in CNC machining centres.
Suited for high-volume CNC operations.
This drill suits shops running coolant-through spindles on rigid CNC machines where the double margin design improves hole straightness and finish. It is not for manual drill presses or handheld tools that cannot maintain the required rigidity, coolant pressure or runout control. Buyers without through-spindle coolant capability should look at alternative tooling. The California Proposition 65 notice also applies to this product.
13.70 mm diameter decides fit
The 13.70 mm cutting diameter is the single specification that determines whether this drill matches the required hole size. Verify the exact diameter against your drawing or operation plan before ordering. No other dimension or tolerance from this tool can compensate for a diameter mismatch. Correct diameter selection avoids scrap and rework on the shop floor.
Highlights
- 70 mm diameter matches precise hole specs
- Coolant-fed design clears chips during deep drilling
- Double margin construction keeps hole straight and round
- Cyclone Xd geometry reduces cutting forces
- Prop 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 13.70 mm coolant-fed drill in my CNC machine and what step is often missed?
Mount the drill in a precision collet or hydraulic holder, then verify coolant flows through the internal channels before starting the cycle — skipping the flow check is the common error.
What maintenance or replacement will the CXDCLM1370AP need after extended use?
The cutting edges will dull and the double margins will wear; plan to regrind or replace the drill once hole tolerance or surface finish degrades beyond spec.
What limit appears first when running this 13.70 mm drill continuously at high feed?
Heat buildup in the cutting zone typically limits sustained performance before the coolant-fed design can fully evacuate chips at 8× diameter depth.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
