M.A. Ford
M.A. Ford CXDCLM1250AP Cyclone Xd 12.50 mm Coolant Fed Double Margin Drill
12.50 mm coolant-fed double-margin drill with 8X Cyclone Xd geometry for deep-hole accuracy
- 50 mm diameter suits precise hole-making
- coolant-fed design clears chips during deep drilling
- double-margin construction improves hole straightness
- Cyclone Xd geometry supports 8x diameter reach
- new condition ensures full factory performance
M.A. Ford CXDCLM1250AP Cyclone Xd Drill
The M.A. Ford CXDCLM1250AP is a 12.50 mm coolant-fed double margin drill built for precision holemaking. It belongs to the Cyclone Xd range and carries an 8X designation for extended reach applications. The tool is supplied new and ships directly from the manufacturer.
Machinists drilling deep, accurate holes in metal
This drill suits machinists who need coolant-through capability and double-margin stability for deep-hole work in metal. It is not intended for hand-held use or for jobs that do not require through-coolant delivery. Buyers without a compatible coolant-fed spindle should look at alternative tooling.
12.50 mm diameter with 8X reach
The defining specification is the 12.50 mm cutting diameter combined with the 8X length-to-diameter ratio. This determines the maximum hole depth achievable in a single pass and the spindle clearance required. Verify that your machine setup matches this diameter and reach before ordering.
Highlights
- 50 mm diameter suits precise hole-making
- coolant-fed design clears chips during deep drilling
- double-margin construction improves hole straightness
- Cyclone Xd geometry supports 8x diameter reach
- new condition ensures full factory performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 12.50 mm diameter work with my existing 12.5 mm drill chuck?
Yes, 12.50 mm and 12.5 mm are the same size, so the shank will fit your chuck without an adapter.
How can I confirm the coolant-fed channels are flowing correctly after installation?
Run the machine at low speed with coolant on; steady flow from both margins and no pressure drop means the internal passages are clear.
Does the box include coolant fittings or only the drill body?
Only the 12.50 mm Cyclone Xd drill body is supplied; coolant fittings, tubing and holders must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
