M.A. Ford
M.A. Ford CXDCLM0810AP Cyclone XD 8X Double Margin Drill 8.10mm
Coolant-fed double-margin drill cuts precise 8.10 mm holes eight diameters deep
- 8x diameter reach drills deeper holes
- Coolant-fed design clears chips efficiently
- Double-margin geometry improves hole accuracy
- 10 mm diameter suits precise applications
- California Prop 65 warning informs safe handling
Purpose and user
The M.A. Ford Cyclone XD 8X drill is a coolant-fed, double-margin cutting tool sized at 8.10 mm. It is built for machine shops and production lines that need deep, straight holes in tough alloys.
Setup checks
Verify that your machine spindle can deliver through-coolant flow and that the holder accepts a straight-shank drill of this diameter. Confirm the workpiece material matches the drill's recommended application range before ordering.
Upgrade context
This drill replaces single-margin or non-coolant-fed bits when hole quality, depth or tool life fall short. The step up is justified when scrap rates rise or cycle times must drop on high-temperature alloys.
Highlights
- 8x diameter reach drills deeper holes
- Coolant-fed design clears chips efficiently
- Double-margin geometry improves hole accuracy
- 10 mm diameter suits precise applications
- California Prop 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What comes with the Cyclone XD 8X drill and what must I supply?
The drill itself is supplied; you must provide a compatible coolant-fed holder and machine spindle.
Which diameter should I select for an 8.10 mm hole?
Choose the 8.10 mm variant — the model number CXDCLM0810AP corresponds to that exact cutting diameter.
What does the 8X designation mean when the tool is in the spindle?
It indicates an 8-times-diameter drilling depth capability, so the 8.10 mm drill can reach approximately 65 mm deep with coolant feed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
