M.A. Ford
M.A. Ford CXDCL3750AP Cyclone Xd 8X Coolant Fed Double Margin Drill
Coolant-fed double-margin drill with 8× diameter depth capability for 3/8 inch and 9.52 mm holes
- 8X diameter drilling depth reaches deep holes
- Coolant-fed design delivers fluid to the cutting zone
- Double-margin geometry improves hole straightness and finish
- 3/8 inch and 9.52 mm diameter covers imperial and metric needs
- New condition ensures full factory performance
Cyclone Xd 8X Drill 3/8 Inch
The M.A. Ford CXDCL3750AP is a solid-carbide drill built for production drilling in steel and high-temperature alloys. Its 8× diameter flute length and through-coolant design evacuate chips from deep holes without peck cycles. The double-margin geometry keeps the tool centred for straight, accurate bores in CNC machining centres.
For High-Volume Deep-Hole Work
Shops running unattended cycles in tough materials gain consistent hole quality and longer tool life from the coolant-fed design. Operations without through-spindle coolant or that only drill shallow holes in soft metals will not use the 8× length or internal channels effectively.
3/8 Inch (9.52 mm) Cutting Diameter
The drill cuts a 9.52 mm hole; the machine spindle must accept a 3/8 inch shank and deliver coolant through the tool. Verify both the holder capacity and the coolant-pressure rating before ordering.
Highlights
- 8X diameter drilling depth reaches deep holes
- Coolant-fed design delivers fluid to the cutting zone
- Double-margin geometry improves hole straightness and finish
- 3/8 inch and 9.52 mm diameter covers imperial and metric needs
- New condition ensures full factory performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What drill-point standard does the Cyclone Xd 8X follow, and what diameter does that limit?
The CXDCL3750AP is a 3/8 inch (9.52 mm) double-margin drill, so the point geometry is fixed to that diameter and cannot be used for larger holes.
What shank style does the CXDCL3750AP have, and what holder does it require?
It uses a straight cylindrical shank matched to the 3/8 inch body, so it must be clamped in a precision collet or hydraulic chuck that accepts 9.52 mm.
How is the coolant fed through this drill, and what setup step is often missed?
Coolant travels through internal channels to the tip; the machine’s through-spindle coolant must be activated and filtered, otherwise the drill will run dry.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
