M.A. Ford
M.A. Ford CDACRM1250 Cyclone Drill for Aluminum 5X 2 Flute Coolant Fed
Coolant-fed cyclone drill bores aluminium at five-times diameter with two flutes
- Designed for aluminium with 5X diameter reach
- Two-flute geometry improves chip evacuation in soft metal
- Coolant-fed design directs fluid to the cutting zone
- Built by M.A. Ford for professional machining use
- California Proposition 65 warning applies to this product
Cyclone Drill for Aluminium 5X
The M.A. Ford CDACRM1250 is a solid-carbide drill designed for high-performance drilling in aluminium and similar non-ferrous alloys. Its 5X diameter flute length and two-flute geometry suit production environments that need fast, accurate holes without pecking cycles. Machinists running CNC centres or dedicated drilling units will value the tool rigidity and chip control this design provides.
Coolant-fed shank for continuous flow
Internal coolant channels deliver lubricant directly to the cutting zone through the shank, removing the need for external flood nozzles. This arrangement improves chip evacuation in deep holes and keeps the cutting edges cool during extended runs. The straight shank fits standard ER collets or hydraulic holders, so the drill drops into existing tooling setups without adapters.
Carbide substrate handles heat and abrasion
The solid-carbide body resists the heat generated at 5X depth-to-diameter ratios, maintaining edge integrity where high-speed steel would soften. Two wide flutes move the characteristic long aluminium chips away from the cut, reducing the chance of re-cutting or packing. California Proposition 65 warnings apply to this product.
Highlights
- Designed for aluminium with 5X diameter reach
- Two-flute geometry improves chip evacuation in soft metal
- Coolant-fed design directs fluid to the cutting zone
- Built by M.A. Ford for professional machining use
- California Proposition 65 warning applies to this product
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What material is the M.A. Ford CDACRM1250 Cyclone Drill designed to cut?
The drill is engineered specifically for aluminium, using a two-flute geometry that evacuates chips efficiently in that material.
What shank style does the CDACRM1250 use for tool-holder fitment?
It has a straight cylindrical shank without flats, so it requires a collet chuck or hydraulic holder that grips the full shank circumference.
How is coolant delivered through this cyclone drill during operation?
Coolant exits through internal channels at the drill point; the machine must supply fluid at the correct pressure and the spindle must be sealed for through-coolant use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
