M.A. Ford
M.A. Ford CDACRM1130 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
A Cyclone drill for aluminium with 5× diameter reach, two flutes and coolant-fed operation
- Designed for aluminium machining with 5X flute geometry
- Two-flute design improves chip evacuation in soft metals
- Coolant-fed channels deliver fluid directly to the cutting zone
- Built by M.A. Ford for professional power-drill applications
- California Proposition 65 warning indicates regulated chemical content
Cyclone Drill for Aluminium 5X
The M.A. Ford CDACRM1130 is a solid-carbide drill built for high-speed aluminium work. Its 5× diameter flute length and through-coolant design suit CNC shops and production cells that need deep, accurate holes in non-ferrous alloys. The two-flute geometry balances chip evacuation with edge strength for consistent finish.
2 Flute Coolant Fed Geometry
Two helical flutes feed coolant directly to the cutting zone, suppressing built-up edge and evacuating long aluminium chips. This single feature determines whether the tool matches your machine’s coolant delivery and the hole-depth-to-diameter ratio you run. Without through-coolant capability the drill cannot perform as intended.
Suited for High-Volume Aluminium Jobs
Shops drilling deep holes in wrought or cast aluminium on a daily basis will benefit from the 5× reach and dedicated coolant path. Buyers who need a general-purpose twist drill for steel, stainless or intermittent hand-held use should look at a different tool class. The Proposition 65 notice also applies for California workplaces.
Highlights
- Designed for aluminium machining with 5X flute geometry
- Two-flute design improves chip evacuation in soft metals
- Coolant-fed channels deliver fluid directly to the cutting zone
- Built by M.A. Ford for professional power-drill applications
- California Proposition 65 warning indicates regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 5X depth capability mean when the drill is in the spindle?
The 5X rating indicates the flute length allows drilling up to five times the tool diameter in a single pass, reducing peck cycles in aluminium.
How does the coolant-fed design affect chip evacuation on this drill?
Internal coolant channels deliver fluid directly to the cutting edges, flushing chips from deep holes and preventing built-up edge in aluminium alloys.
What shank configuration does the CDACRM1130 need for a standard tool holder?
The drill uses a straight cylindrical shank sized to match the cutting diameter, so it fits directly into collet chucks or hydraulic holders without adapters.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
