M.A. Ford
M.A. Ford CDACRM1060 Cyclone Drill for Aluminium 5X 2 Flute Coolant Fed
Coolant-fed cyclone drill with two flutes for aluminium, 5× diameter depth
- Designed for aluminium with 5X performance
- Two-flute geometry improves chip evacuation
- Coolant-fed design enhances tool life
- M.A. Ford quality for professional results
- California Proposition 65 warning applies
M.A. Ford CDACRM1060 Cyclone Drill for Aluminium
The M.A. Ford CDACRM1060 is a Cyclone drill designed for aluminium machining. It features a 5X diameter design with two flutes and coolant-fed operation. This new power tool suits professionals needing efficient chip evacuation in non-ferrous materials.
Installation notes and common issues
The coolant-fed design requires a compatible machine spindle and sealed tool holder to function correctly. Improper coolant pressure or misalignment can reduce tool life and hole quality. Ensure the holder provides adequate runout control for the 5X length.
5X diameter reach for deep holes
The 5X diameter-to-length ratio defines the maximum drilling depth achievable in a single pass. Shops needing deeper holes without peck cycles should verify this reach matches their part thickness. Buyers requiring longer reach or different flute counts must select another tool.
Highlights
- Designed for aluminium with 5X performance
- Two-flute geometry improves chip evacuation
- Coolant-fed design enhances tool life
- M.A. Ford quality for professional results
- California Proposition 65 warning applies
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How can I confirm the CDACRM1060 is cutting correctly in aluminium?
Check for consistent chip formation and a smooth hole finish; the 5X design with coolant feed should evacuate chips cleanly without overheating the 2 flute edges
What comes with the CDACRM1060 and what must I supply?
The drill itself is included; you must provide a compatible coolant-fed tool holder and a coolant delivery system for the through-spindle feed
Which capacity should I choose for the CDACRM1060?
The CDACRM1060 is a single model number; select it when your application requires the 5X length and 2 flute geometry for aluminium drilling
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
