M.A. Ford
M.A. Ford CDACRM0980 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
A coolant-fed, two-flute cyclone drill designed for aluminium at five-times diameter depth
- Designed for aluminium machining with 5X flute geometry
- Two-flute coolant-fed design improves chip evacuation
- M.A. Ford manufacturing ensures professional-grade reliability
- California Proposition 65 compliance disclosed for safety awareness
- Cyclone series built for high-performance drilling applications
M.A. Ford CDACRM0980 Aluminium Drill
This M.A. Ford CDACRM0980 Cyclone drill is built for aluminium machining with a 5× diameter flute length and two-flute geometry. Coolant-fed channels deliver lubricant directly to the cutting zone for chip evacuation and temperature control. The tool is supplied new and ships directly from the manufacturer.
Suited for aluminium work needing deep holes
Machinists drilling aluminium to five times the tool diameter will benefit from the extended flute and internal coolant. Workshops without through-coolant capability or those cutting steel, titanium or composite materials should select a different drill design.
5× diameter flute length sets reach
The 5× flute-to-diameter ratio determines how deep a hole can be drilled in one pass without pecking. Verify that your machine spindle and coolant system match this specification before ordering.
Highlights
- Designed for aluminium machining with 5X flute geometry
- Two-flute coolant-fed design improves chip evacuation
- M.A. Ford manufacturing ensures professional-grade reliability
- California Proposition 65 compliance disclosed for safety awareness
- Cyclone series built for high-performance drilling applications
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the coolant-fed design reduce heat when drilling aluminium continuously?
The drill uses internal coolant channels to carry heat away from the cutting edges during sustained aluminium work.
What machine setup is required to use the coolant-fed feature?
You need a spindle or holder that can deliver coolant through the tool centre.
Can the 5X flute geometry handle the same feed rates as older high-speed steel drills?
The carbide construction and 5X design allow higher feeds than traditional HSS drills in aluminium.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
