M.A. Ford
M.A. Ford CDACRM0800 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
Cyclone drill CDACRM0800 for aluminium with 5× diameter depth, two flutes and coolant feed
- Cyclone drill geometry optimised for aluminium machining
- 5× diameter drilling depth increases hole-making reach
- Two-flute design promotes efficient chip evacuation
- Coolant-fed operation improves tool life and finish
- M.A. Ford manufacturing quality for professional workshops
Aluminium 5x drill for CNC work
The M.A. Ford CDACRM0800 is a solid-carbide Cyclone drill engineered for aluminium alloys. Its 5x diameter flute length and two-flute geometry suit high-speed CNC operations where chip evacuation and hole straightness are critical. The coolant-fed design directs lubricant to the cutting zone for consistent performance.
Coolant-fed shank fits standard holders
The through-coolant shank works with any holder that accepts internal coolant supply, removing the need for external flood systems. Two wide flutes evacuate chips efficiently, freeing the spindle from re-cutting debris and reducing cycle time on deep-hole jobs.
5x depth capacity with 800-range sizing
The 5x diameter reach handles medium-depth holes in aluminium without pecking, while the 800-series designation identifies the cutting diameter range. Prop 65 labelling notes chemical content; users requiring longer reach or different materials will need alternative tooling.
Highlights
- Cyclone drill geometry optimised for aluminium machining
- 5× diameter drilling depth increases hole-making reach
- Two-flute design promotes efficient chip evacuation
- Coolant-fed operation improves tool life and finish
- M.A. Ford manufacturing quality for professional workshops
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How deep can the 5X length drill before chip evacuation becomes the limiting factor?
The 5X diameter design allows drilling up to five times the tool diameter before flute packing typically restricts further progress in aluminium.
Does the coolant-fed design keep the shank temperature low enough for continuous shifts?
Internal coolant channels deliver fluid directly to the cutting zone, reducing heat build-up during extended production runs.
What machine spindle and holder are required to run this coolant-fed cyclone drill?
A machining centre with through-spindle coolant capability and a compatible sealed tool holder are needed to supply coolant through the drill.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
