M.A. Ford
M.A. Ford CDACRM0750 Cyclone Drill for Aluminum 5X 2 Flute Coolant Fed
Cyclone drill designed for aluminium with 5× diameter reach, two flutes and coolant feed
- Designed for aluminium machining with 5X diameter reach
- Two-flute geometry clears chips efficiently in soft alloys
- Coolant-fed design reduces heat during deep-hole drilling
- Cyclone series optimised for high-speed aluminium work
- California Prop 65 warning — contains listed chemicals
Cyclone Drill for Aluminum 5X
The M.A. Ford CDACRM0750 is a solid-carbide drill built for high-speed aluminium work. Its two-flute geometry and 5× diameter flute length suit production runs where chip evacuation and hole quality matter. Machinists running CNC centres or dedicated drill units will value the coolant-fed design.
Verify coolant delivery and holder fit
Confirm that your spindle can supply through-tool coolant at the pressure your process requires. Check that the shank diameter matches your collet, hydraulic chuck or shrink-fit holder without adapters. Ensure the machine’s maximum RPM covers the speeds recommended for this 750 series carbide grade.
Carbide construction with internal coolant channels
The solid-carbide body resists wear in abrasive aluminium alloys while the internal channels deliver coolant straight to the cutting edges. This layout reduces built-up edge, improves surface finish and allows deeper holes without peck cycles. The two-flute layout keeps flute space open for high metal-removal rates.
Highlights
- Designed for aluminium machining with 5X diameter reach
- Two-flute geometry clears chips efficiently in soft alloys
- Coolant-fed design reduces heat during deep-hole drilling
- Cyclone series optimised for high-speed aluminium work
- California Prop 65 warning — contains listed chemicals
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What comes in the box with the CDACRM0750 Cyclone Drill and do I need to buy coolant fittings separately?
The drill itself is supplied; coolant delivery fittings and supply lines are not included and must be sourced to match your machine.
How do I choose between the available versions of this 5X 2-flute aluminum drill?
The CDACRM0750 is a single specification — 5× diameter depth, two flutes, coolant fed — so there are no alternate versions to select.
What does the 5X designation mean when the drill is running in a CNC spindle?
It indicates the flute length allows drilling to a depth of five times the tool diameter before pecking or withdrawal.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
