M.A. Ford
M.A. Ford CDACRM0740 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
A 5× diameter, two-flute coolant-fed drill for aluminium, model CDACRM0740
- Drills aluminium efficiently with 5X flute design
- Two flutes clear chips fast during deep drilling
- Coolant-fed design reduces heat in aluminium work
- M.A. Ford quality built for professional use
- Proposition 65 warning applies for California users
Cyclone Drill for Aluminium 5X
The M.A. Ford CDACRM0740 Cyclone Drill is a coolant-fed cutting tool designed for aluminium machining. Its two-flute geometry and 5X diameter length support deep-hole drilling in non-ferrous materials. The drill targets machine-shop professionals and CNC operators who require consistent chip evacuation in aluminium workpieces.
Verify coolant delivery and holder compatibility
Confirm that your machine spindle and tool holder can supply through-coolant at the pressure your process demands. The shank must match your collet or chuck specification, and the 5X flute length requires sufficient Z-axis travel. Check that your CAM strategy accounts for the two-flute design in aluminium.
Solid carbide construction
The solid carbide body resists wear in abrasive aluminium alloys while internal coolant holes deliver lubricant directly to the cutting edges. This arrangement reduces built-up edge and improves hole straightness in deep drilling. The tool carries a Proposition 65 warning for chemicals known to the State of California to cause cancer and reproductive harm.
Highlights
- Drills aluminium efficiently with 5X flute design
- Two flutes clear chips fast during deep drilling
- Coolant-fed design reduces heat in aluminium work
- M.A. Ford quality built for professional use
- Proposition 65 warning applies for California users
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the M.A. Ford CDACRM0740 Cyclone Drill come with any accessories or coolant fittings in the box?
The drill is supplied as a single cutting tool. Coolant delivery components, tool holders and any work-holding fixtures must be sourced separately.
How do I choose the right version of the CDACRM0740 for my aluminium job?
This model is a fixed 5× diameter, two-flute, coolant-fed geometry for aluminium. Select it when the hole depth and material match those parameters; other diameters or flute counts need a different part number.
What does the 740 designation mean for real-world drilling performance?
The 740 identifier is the manufacturer's catalogue code for this specific 5×D, two-flute, coolant-fed cyclone drill; it does not represent a speed, feed or diameter value.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
