M.A. Ford
M.A. Ford CDACRM0710 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
Cyclone drill for aluminium with 5x diameter reach, two flutes, coolant feed and CDACRM0710 identification
- Designed for aluminum with 5X diameter reach
- Two-flute geometry clears chips efficiently
- Coolant-fed design manages heat during deep drilling
- Cyclone series built for high-performance metalworking
- M.A. Ford quality backed by precision manufacturing
M.A. Ford Cyclone Drill for Aluminium
This M.A. Ford Cyclone drill is engineered specifically for aluminium machining. The two-flute geometry and coolant-fed design target chip evacuation and heat control in non-ferrous alloys. It suits CNC operators and job-shop machinists who need reliable hole-making in aluminium workpieces.
Shank fit and coolant setup
Installation follows standard toolholder practice for the shank style supplied. The critical step is verifying coolant delivery through the tool body; insufficient flow or blocked passages will cause rapid flank wear and poor surface finish in aluminium.
Five-times diameter reach
The 5× diameter flute length provides deep-hole capability without peck cycles in many aluminium applications. Coolant pressure and volume become the limiting factor once hole depth approaches the flute limit or when chip packing exceeds evacuation capacity. The number 710 appears in the model designation. Proposition 65 warnings apply.
Highlights
- Designed for aluminum with 5X diameter reach
- Two-flute geometry clears chips efficiently
- Coolant-fed design manages heat during deep drilling
- Cyclone series built for high-performance metalworking
- M.A. Ford quality backed by precision manufacturing
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I verify the CDACRM0710 Cyclone Drill is cutting correctly after setup?
Check for consistent chip evacuation through the coolant-fed channels and a smooth surface finish on the aluminum workpiece without built-up edge.
What comes with the CDACRM0710 drill and what must I source separately?
The drill itself is supplied; you will need to provide a compatible tool holder, coolant supply system, and workholding for your machine.
Which version of the Cyclone Drill should I select for 5× depth aluminum drilling?
The CDACRM0710 is the 5× diameter, 2-flute, coolant-fed model designed specifically for aluminum applications.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
