M.A. Ford
M.A. Ford CDACRM0330 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
Cyclone drill for aluminium with 5x diameter reach, two flutes, coolant feed and model CDACRM0330
- Designed for aluminium machining with 5× diameter reach
- Two-flute geometry improves chip evacuation in soft alloys
- Coolant-fed design delivers fluid directly to the cutting zone
- M.A. Ford Cyclone series built for high-speed drilling
- California Proposition 65 warning applies to this product
Cyclone Drill for Aluminium
The M.A. Ford CDACRM0330 is a solid-carbide drill engineered for aluminium alloys. Its 5× diameter flute length and two-flute geometry target high-volume CNC departments that need fast chip evacuation in non-ferrous metals.
5× diameter with coolant feed
The defining specification is the 5× diameter drilling depth combined with internal coolant delivery. This pairing allows deep-hole drilling in a single pass while flushing chips away from the cutting zone, a requirement the tool is built to satisfy.
Straight shank for standard holders
The drill uses a plain cylindrical shank that fits common hydraulic, shrink-fit or collet holders without adapters. Problems usually arise when the machine spindle lacks through-coolant capability or when run-out exceeds the tight tolerance needed for 5× depth performance.
Highlights
- Designed for aluminium machining with 5× diameter reach
- Two-flute geometry improves chip evacuation in soft alloys
- Coolant-fed design delivers fluid directly to the cutting zone
- M.A. Ford Cyclone series built for high-speed drilling
- California Proposition 65 warning applies to this product
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 5X in the CDACRM0330 model mean for drilling depth?
The 5X indicates a five-times-diameter drilling depth capability for this Cyclone drill.
How does the coolant-fed design affect chip evacuation in aluminum?
Internal coolant channels flush chips directly from the cutting zone, preventing buildup in deep holes.
What shank configuration does the CDACRM0330 need for a standard tool holder?
It uses a standard cylindrical shank that fits common drill chucks and collet holders.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
