M.A. Ford
M.A. Ford CDACR1440 Cyclone Drill Aluminum 5X 2 Flute Coolant Fed
Cyclone drill for aluminium with 5× reach, two flutes and coolant feed
- Cyclone geometry drills aluminum efficiently
- 5X diameter reach extends hole depth
- Two-flute design clears chips rapidly
- Coolant-fed operation reduces heat buildup
- Complies with California Proposition 65 requirements
Aluminium 5X Cyclone Drill
The M.A. Ford CDACR1440 is a coolant-fed drill designed for aluminium machining with a 5X diameter flute length. Its two-flute geometry supports chip evacuation in non-ferrous materials. This tool targets CNC operators and job shops cutting aluminium alloys where through-coolant delivery is available.
Sustained cutting behaviour
Through-coolant channels deliver lubricant directly to the cutting edges during extended passes. The 1440 flute configuration helps maintain evacuation rates when the tool remains engaged for long periods. Continuous coolant flow reduces built-up edge formation that typically degrades hole quality in aluminium over time.
Upgrade path
Replaces standard external-coolant drills when machine spindle and tool-holder support through-coolant supply. The jump is worthwhile for high-volume aluminium work where cycle time and hole finish justify the coolant-fed investment. Not suited for shops without through-coolant capability or for materials outside the aluminium range.
Highlights
- Cyclone geometry drills aluminum efficiently
- 5X diameter reach extends hole depth
- Two-flute design clears chips rapidly
- Coolant-fed operation reduces heat buildup
- Complies with California Proposition 65 requirements
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the CDACR1440 generate during continuous drilling in aluminium?
The drill is designed for high-speed aluminium work with internal coolant delivery that carries heat away from the cutting zone, keeping the tool and workpiece cooler during extended runs.
What machine spindle and coolant system are required to run this 5× diameter coolant-fed drill?
You need a CNC or machining centre with through-spindle coolant capability and a holder that matches the drill shank, plus a pump able to supply sufficient pressure for the internal channels.
Will the CDACR1440 fit the same tool holders and collets I already use for older cyclone drills?
The shank follows standard industry dimensions for this drill class, so it will seat in the same ER collets, hydraulic chucks or shrink-fit holders you currently use for comparable cyclone drills.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
