M.A. Ford
M.A. Ford 30011610 Twister Gp 5X Drill 2.95 mm
A 2.95 mm Twister GP 5X drill bit with a straight shank for precision drilling
- Twister GP 5X design improves drilling speed
- 95 mm diameter suits precise hole-making
- Straight shank fits standard drill chucks
- New condition ensures full factory performance
- California Proposition 65 warning included for safety awareness
2.95 mm Twister Gp 5X drill
The M.A. Ford 30011610 is a straight-shank drill bit ground to a 2.95 mm diameter for precision hole-making in metal and composite materials. It suits machinists, maintenance technicians and fabricators who need consistent chip evacuation and tool life in production or repair work.
Thermals noise and power draw
As a non-powered cutting accessory the drill generates no electrical noise, draws no current and has no thermal design power of its own. Heat produced during cutting depends entirely on the machine spindle speed, feed rate, coolant use and workpiece material rather than on the bit itself.
2.95 mm cutting diameter
The single specification that determines fit is the 2.95 mm nominal diameter; the bit will only produce holes of that size and cannot be used where a larger or smaller bore is required. Buyers who need a different hole diameter must select another size.
Highlights
- Twister GP 5X design improves drilling speed
- 95 mm diameter suits precise hole-making
- Straight shank fits standard drill chucks
- New condition ensures full factory performance
- California Proposition 65 warning included for safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 2.95 mm straight shank in my drill chuck?
Open the chuck jaws wide enough, insert the shank fully until it seats, then tighten securely; the common error is leaving a gap that lets the bit walk.
What replacement will the Twister Gp 5X drill need after extended use?
The cutting edges dull first; plan to replace the drill when holes become oversize or feed force rises.
What limit appears first when drilling continuously with the 30011610?
Heat buildup at the cutting lips reduces edge life fastest, so use cutting fluid and clear chips often.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
