M.A. Ford
M.A. Ford 2XDCE2362A Twister XD Drill 12X-25X Coolant Fed 6.00mm
Coolant-fed Twister XD drill delivers 12X-25X diameter depth in 6.00mm size
- Drills deep holes up to 25× diameter
- Coolant-fed design clears chips for smoother cuts
- 00 mm shank fits standard collets securely
- 12× minimum reach handles shorter depths efficiently
- Prop 65 notice informs safe handling practices
6 mm Twister XD coolant-fed drill
The M.A. Ford 2XDCE2362A is a solid-carbide drill with a 6.00 mm diameter and internal coolant channels. It covers a 12X to 25X diameter depth range for deep-hole drilling in one pass. The tool is new and ships directly from the manufacturer. California Proposition 65 warnings apply for cancer and reproductive-harm substances.
Suited for deep-hole CNC work; not for hand-held use
This drill suits CNC operators who need consistent chip evacuation and cooling at depths up to 25 diameters. It is not for manual drilling, drill-press work without through-spindle coolant, or diameters outside 6.00 mm. Buyers needing a different diameter or a non-coolant geometry should select another tool.
12X-25X diameter depth capability
The defining specification is the 12X to 25X depth-to-diameter range enabled by the internal coolant feed. This single figure determines whether the drill reaches the required hole depth in a single operation without pecking.
Highlights
- Drills deep holes up to 25× diameter
- Coolant-fed design clears chips for smoother cuts
- 00 mm shank fits standard collets securely
- 12× minimum reach handles shorter depths efficiently
- Prop 65 notice informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I verify the 2XDCE2362A Twister XD is cutting correctly after setup?
Check that the 6.00 mm drill produces clean holes at the 12X to 25X depth range with steady coolant flow and no excessive vibration.
What comes with the 2XDCE2362A Twister XD and what must I supply?
The drill itself is included; you must provide a compatible coolant-fed holder, coolant supply system and a machine spindle that accepts the 6.00 mm shank.
Which 2XDCE2362A Twister XD variant should I choose for my application?
This model is the 6.00 mm diameter version designed for 12X to 25X drilling depths; select it when those exact dimensions match your hole requirements.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
