M.A. Ford
M.A. Ford 22947240 Twister Al 5X 3 Flute 12.00mm drill
Twister Al 5X 3-flute drill cuts aluminium with 12.00 mm diameter and five-times reach
- Twister Al 5X design optimised for aluminium machining
- Three-flute geometry improves chip evacuation in soft metals
- 00 mm diameter suits standard hole sizes
- M.A. Ford brand recognised for precision cutting tools
- New condition guarantees full factory performance
12 mm 3-flute aluminium drill
The M.A. Ford 22947240 Twister Al 5X is a 12.00 mm solid-carbide drill with three flutes designed for high-speed drilling in aluminium and other non-ferrous alloys. It targets CNC operators and job-shop machinists who need consistent hole quality and long tool life in soft, gummy materials.
Proprietary 5X geometry and coating
The 5X point geometry and specialised coating reduce built-up edge and improve chip evacuation when drilling aluminium. This combination allows higher feed rates without sacrificing surface finish or dimensional accuracy compared with standard bright or generic coated drills.
Standard shank fits common holders
The drill uses a standard cylindrical shank that fits ER collets, Weldon flats and hydraulic chucks without adapters. Common issues include chatter if runout exceeds holder limits and reduced life if coolant pressure is too low for chip flushing.
Highlights
- Twister Al 5X design optimised for aluminium machining
- Three-flute geometry improves chip evacuation in soft metals
- 00 mm diameter suits standard hole sizes
- M.A. Ford brand recognised for precision cutting tools
- New condition guarantees full factory performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
When will the 12.00mm Twister Al 5X 3 Flute drill need replacement?
Replace the drill when the three flutes show visible wear or when hole quality in aluminium drops below tolerance.
What limits continuous drilling with the 22947240?
Heat buildup in the aluminium workpiece and flute clogging from chips are the first limits during sustained use.
How much heat does the M.A. Ford 12.00mm drill generate in all-day operation?
The drill itself produces heat through friction; use coolant or peck cycles to keep the 12.00mm cutting zone within safe temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
