M.A. Ford
M.A. Ford 22927560 Twister Al 5X 3 Flute 7.00mm Drill
7.00mm three-flute Twister Al 5X drill for high-performance aluminium drilling
- Designed for aluminium with 3-flute geometry
- 00 mm diameter suits precise drilling tasks
- Twister Al 5X series targets high-speed work
- M.A. Ford quality built for professional use
- California Prop 65 warning applies to this item
Application fit
The M.A. Ford 22927560 Twister Al 5X drill is a 7.00 mm three-flute tool designed for high-speed drilling in aluminium and similar non-ferrous alloys. It suits CNC operators and job-shop technicians who need consistent chip evacuation in production runs. Buyers who require coolant-through capability or a different diameter should select another tool.
Setup checks
Verify that your machine spindle and holder accept a 7.00 mm shank and can deliver the RPM range recommended for aluminium with a 5X geometry. Confirm the workpiece clamping is rigid enough to prevent vibration at elevated feed rates. The product carries a California Proposition 65 notice for substances linked to cancer and reproductive harm, so review your shop safety data sheets before use.
Sustained load behaviour
The three-flute 5X design promotes steady chip formation and heat dissipation during extended drilling cycles in aluminium. Flute geometry reduces the tendency for built-up edge when the tool remains engaged for long periods. Operators should monitor flank wear at the expected feed and speed to maintain hole tolerance throughout the batch.
Highlights
- Designed for aluminium with 3-flute geometry
- 00 mm diameter suits precise drilling tasks
- Twister Al 5X series targets high-speed work
- M.A. Ford quality built for professional use
- California Prop 65 warning applies to this item
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the M.A. Ford 22927560 Twister Al 5X 3 Flute drill come as a single bit or in a multi-pack?
The manufacturer lists the item as an individual 7.00 mm drill bit; no additional bits, holders or accessories are included in the package.
Should I choose the 7.00 mm diameter or look for a different size in the Twister Al 5X line?
Select the 7.00 mm version when your hole specification calls for that exact diameter; other diameters are separate part numbers and are not interchangeable with this model.
What does the 5X designation mean for drilling performance in aluminium?
The 5X rating indicates a flute length five times the 7.00 mm diameter, giving deeper chip clearance and straighter holes in aluminium and other non-ferrous metals.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
