M.A. Ford
M.A. Ford 16501560 Tuffcut GP 4-flute ball-nose end mill 1/64
A 4-flute ball-nose end mill with a 1/64 stub length for precision contouring and profiling in general-purpose milling applications
- 4-flute ball-nose geometry enables smooth 3-D contouring
- Stub length increases rigidity for precise shallow cuts
- 1/64 inch diameter suits fine-detail milling work
- M.A. Ford manufacturing ensures consistent tool quality
- California Proposition 65 warning discloses regulated chemical content
Precision stub ball-nose mill for tight contours
The M.A. Ford 16501560 Tuffcut GP is a 1/64-inch diameter, 4-flute ball-nose end mill with a stub length. Its four cutting edges distribute chip load evenly for smoother finishes in profiling, slotting and 3-D contouring operations on CNC and manual milling machines.
Suited for light finishing passes in steel
Machinists who need a small-diameter tool for detailed cavity work will find the stub length adds rigidity and reduces deflection. The tool is not for heavy roughing, deep-pocket milling or high-feed applications where a longer flute or fewer flutes would clear chips more effectively.
1/64-inch diameter decides fit for micro-detail work
This single dimension determines whether the cutter can enter the smallest radii and slots in your programme. Verify the feature size on your drawing before ordering; no other specification overrides this limit.
Highlights
- 4-flute ball-nose geometry enables smooth 3-D contouring
- Stub length increases rigidity for precise shallow cuts
- 1/64 inch diameter suits fine-detail milling work
- M.A. Ford manufacturing ensures consistent tool quality
- California Proposition 65 warning discloses regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank diameter does the 16501560 end mill use, and what collet or holder does it require?
The 1/64-inch diameter shank fits a matching 1/64 collet or a shrink-fit holder with the same bore; verify the collet runout before cutting.
What minimum clearance does the stub-length ball-nose profile need in a fixture or pocket?
The stub flute is shorter than a standard length, so the pocket must expose only the flute depth plus chip clearance; measure the actual flute length on the tool before finalising the setup.
Which step do users most often skip when installing this 4-flute ball-nose cutter in a CNC router?
Many operators forget to tighten the collet nut to the specified torque after the tool seats fully, causing the micro-diameter shank to slip under cutting forces.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
