M.A. Ford
M.A. Ford 1570AP Cyclone Xd 3X Coolant Fed Double Margin Drill 15.70mm
Coolant-fed double-margin drill with 3× diameter reach for 15.70 mm holes
- Coolant-fed design clears chips efficiently during deep drilling
- Double-margin geometry keeps the 15.70 mm hole straight and accurate
- Cyclone Xd coating extends tool life in tough materials
- 3X flute configuration balances strength and chip evacuation
- California Proposition 65 warning informs safe handling practices
15.70mm Cyclone Xd drill for precision holes
The M.A. Ford 1570AP Cyclone Xd is a 15.70mm double-margin drill designed for coolant-fed operation. Its three-times-diameter flute length supports deeper cuts in a single pass. Machinists targeting tight-tolerance holes in steel or exotic alloys will find the geometry suited to high-accuracy production runs.
Upgrade from standard coolant drills
Conventional coolant-fed drills with shorter flute lengths often require peck cycles that increase cycle time and risk chip packing. The 3X design replaces those tools when hole depth reaches three times the diameter and straightness must stay within tight bands. The jump is worth it when scrap rates on deep holes become unacceptable.
Build integration for CNC cells
The tool fits standard coolant-through holders and requires a machine spindle capable of delivering coolant at pressure. Its double margins guide the drill without needing a separate pilot operation, freeing a tool station in the turret. Shops must verify holder compatibility and coolant filtration to avoid blockage in the internal channels.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- Double-margin geometry keeps the 15.70 mm hole straight and accurate
- Cyclone Xd coating extends tool life in tough materials
- 3X flute configuration balances strength and chip evacuation
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank diameter matches the 15.70 mm Cyclone Xd drill for tool-holder fit?
The drill has a 15.70 mm cutting diameter and a matching 15.70 mm shank, so select a holder or collet sized for 15.70 mm.
Which installation step is often missed when setting up the coolant-fed Cyclone Xd drill?
Connect the through-tool coolant supply and verify flow before spinning the spindle; running dry overheats the double-margin lands.
When should the 15.70 mm double-margin drill be replaced?
Replace it when the corner wear land reaches the manufacturer’s wear limit or when hole size drifts beyond tolerance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
