M.A. Ford
M.A. Ford 15603125A Garden Statue
A 1/32 inch diameter, two-flute ball nose end mill with a necked design for precision milling
- TypeCutting Tools
- Precision ball-nose geometry for smooth 3D contours
- Two-flute design improves chip evacuation in tight spaces
- Necked shank extends reach for deep-cavity profiling
- 1/32 inch diameter suits fine-detail machining
- California Prop 65 warning disclosed for regulated substances
Precision Cutting Tool
The M.A. Ford 15603125A is a 2 flute ball nose end mill with a necked design and a 1/32 diameter. It is built for machinists and engineers who need precise contouring in detailed milling work. The TuffCut DM construction supports accurate material removal in tight spaces.
Thermal And Power Profile
Normal operation generates heat at the cutting interface that must be managed with appropriate coolant or air blast. Power draw depends entirely on the spindle motor and feed rates selected by the operator. Noise levels vary with machine rigidity and the workpiece material being cut.
Build Integration Needs
This tool requires a compatible tool holder and a machine spindle capable of the speeds needed for the 1/32 diameter. It frees up clearance in deep cavities thanks to the necked geometry. Buyers who need larger diameters or different flute counts must select another tool.
Highlights
- Precision ball-nose geometry for smooth 3D contours
- Two-flute design improves chip evacuation in tight spaces
- Necked shank extends reach for deep-cavity profiling
- 1/32 inch diameter suits fine-detail machining
- California Prop 65 warning disclosed for regulated substances
Specifications
| Brand | M.A. FORD |
|---|---|
| Type | Cutting Tools |
Questions about this item
How do I install the 1/32 inch ball nose end mill in my CNC machine without breaking the necked shank?
Clamp the tool by the shank only, keeping the necked section clear of the collet face, and use a torque wrench to the holder manufacturer's spec so the 1/32 inch cutter does not deflect on entry.
When should I replace the 2 flute diamond coated cutter during long production runs?
Replace the tool when flank wear reaches the coating thickness limit or when surface finish on the workpiece degrades, as the diamond layer cannot be re-sharpened once worn through.
What cutting speed limit appears first when running the 1/32 inch end mill continuously in graphite?
Heat buildup in the necked shank becomes the limiting factor before the diamond coating fails, so reduce spindle speed or use peck cycles to keep the 1/32 inch tool from overheating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
