M.A. Ford
M.A. Ford 15007000 Tuffcut Gp 2 Flute Ball Nose End Mill .0700 pneumatic accessory
Two-flute ball-nose end mill for precision contouring and finishing in milling operations
- Two-flute ball nose design enables smooth contouring
- TuffCut GP series built for general-purpose milling
- California Proposition 65 warning for cancer risk
- California Proposition 65 warning for reproductive harm
- Manufacturer direct shipping on qualifying orders
Precision end mill for fine detail
The M.A. Ford 15007000 Tuffcut GP is a two-flute ball nose end mill designed for contouring and finishing in a range of materials. Its small .0700 diameter suits intricate profiling, slotting and 3D surface work on CNC mills or precision manual machines. The tool arrives new and ready for immediate use in production or prototype runs.
Machinists needing tight-radius cuts
This cutter serves shops that require a very small ball profile for detailed mould cavities, engraving or tight internal corners. It is not suited for heavy roughing, high material-removal rates or applications demanding a larger radius or more flutes for chip evacuation. Buyers who need greater reach or a different shank style should consider other tooling.
Handles fine finishing passes comfortably
The two-flute geometry provides sufficient chip clearance for light finishing passes in aluminium, steel and plastics at appropriate speeds. It runs out when asked to plunge deep slots or hog large volumes where a coarse-pitch rougher would be required. Operators should match feed and speed to the small diameter to avoid deflection or breakage.
Highlights
- Two-flute ball nose design enables smooth contouring
- TuffCut GP series built for general-purpose milling
- California Proposition 65 warning for cancer risk
- California Proposition 65 warning for reproductive harm
- Manufacturer direct shipping on qualifying orders
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What collet or chuck size do I need to hold the 0.0700-inch shank of the 15007000 end mill?
Use a precision collet or drill chuck that grips a 0.0700-inch shank; the two-flute ball-nose geometry requires concentric clamping to avoid run-out.
Will the 15007000 cut cleanly in the older manual Bridgeport I keep in the shop?
Yes — the 2-flute ball-nose design works on any mill with sufficient spindle speed for the small diameter; reduce feed rate on manual machines to prevent tool deflection.
How can I verify the 15007000 is cutting correctly once installed?
Check for a smooth hemispherical finish without chatter marks; measure the radius with a ball gauge to confirm it matches the 0.0700-inch tool size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
