M.A. Ford
M.A. Ford 15004720 Tuffcut GP 2-flute ball nose end mill 1.2mm pneumatic accessory
A 1.2 mm two-flute ball nose end mill for profiling and finishing in a milling machine
- Precision contouring with 2-flute ball nose design
- 2 mm diameter for fine-detail milling
- Tuffcut GP series built for general-purpose use
- M.A. Ford quality for reliable cutting performance
- New condition ensures full tool life from first use
Product identity
The M.A. Ford 15004720 Tuffcut GP is a 1.2 mm diameter 2-flute ball nose end mill designed for general-purpose milling in a pneumatic accessory format. It suits machinists and toolroom operators who need a small-radius cutter for contouring and finishing operations.
Setup checks
Verify that your pneumatic spindle or tool holder accepts the shank configuration used on this accessory and that the machine can run at the speeds required for a 1.2 mm cutter. Confirm the workpiece material is compatible with the general-purpose geometry and that the tool length suits your fixture clearance.
Thermals noise power
In normal use the cutter generates heat at the cutting zone; ensure adequate coolant or air blast to manage temperature and chip evacuation. The pneumatic drive produces characteristic motor and airflow noise, so hearing protection is advisable. Power draw depends on the spindle motor and cutting parameters rather than the accessory itself.
Highlights
- Precision contouring with 2-flute ball nose design
- 2 mm diameter for fine-detail milling
- Tuffcut GP series built for general-purpose use
- M.A. Ford quality for reliable cutting performance
- New condition ensures full tool life from first use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What comes with the 15004720 end mill and is a holder required?
The box contains the 1.2 mm Tuffcut GP 2-flute ball nose end mill itself. A compatible collet or tool holder for your machine is not included and must be sourced separately.
Which diameter should I select for fine-detail profiling?
The 1.2 mm diameter is the only size offered under part number 15004720; choose it when you need a small-radius ball nose for intricate contour work.
How does the 1.2 mm ball nose perform in a CNC router?
The 1.2 mm two-flute ball nose produces a smooth radius finish in woods, plastics and non-ferrous metals, with the small diameter allowing tight inside corners and detailed 3-D surfacing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
