M.A. Ford
M.A. Ford 14062990A 4 Flute Ball Nose End Mill 16.0mm
Four-flute ball nose end mill, 16.0 mm, for profiling and finishing in general milling
- 4-flute design delivers smoother finishes on contoured surfaces
- 0 mm ball nose radius suits profiling and 3-D milling tasks
- M.A. Ford TuffCut GP construction provides reliable wear resistance
- California Prop 65 warning indicates regulated chemical content
- Manufacturer direct shipping ensures genuine product origin
M.A. Ford Tuffcut GP 4-Flute End Mill
The M.A. Ford 14062990A is a 16.0mm ball nose end mill designed for precision contouring and profiling. Its four-flute geometry provides a stable cutting action suitable for finishing operations in a variety of materials. This new accessory is built for machinists and engineers requiring reliable tool performance.
Suited for finishing and light roughing passes
Machinists producing 3D contours, moulds or complex profiles will benefit from the ball nose design and flute count. The tool is not intended for heavy material removal rates or high-volume production environments where dedicated roughers or higher flute counts are required. Buyers needing larger diameters or specialised coatings for exotic alloys should evaluate alternative tooling.
16.0mm diameter defines the cutting envelope
The cutter comfortably handles finishing passes and moderate profiling tasks within its 16.0mm capacity. It runs out when operations demand diameters exceeding this size or when extreme tool lengths introduce deflection beyond acceptable limits. The California Proposition 65 notice indicates the presence of listed chemicals requiring workplace awareness.
Highlights
- 4-flute design delivers smoother finishes on contoured surfaces
- 0 mm ball nose radius suits profiling and 3-D milling tasks
- M.A. Ford TuffCut GP construction provides reliable wear resistance
- California Prop 65 warning indicates regulated chemical content
- Manufacturer direct shipping ensures genuine product origin
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What milling machine or CNC setup is required to run this 16.0 mm shank end mill?
You need a milling machine or CNC router with a collet or chuck that accepts a 16.0 mm shank and provides enough spindle torque for a four-flute carbide cutter.
Can this 16.0 mm ball nose cutter be used on the same jobs I currently run with smaller diameter end mills?
The larger 16.0 mm diameter removes more material per pass, so you must reduce step-over and adjust feed rates to avoid overloading the spindle or breaking the tool.
How do I confirm the 14062990A is cutting correctly after installation?
Check for a smooth, scallop-free surface on the contoured workpiece, listen for steady cutting noise without chatter, and verify chip formation is consistent and not discoloured.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
