M.A. Ford
M.A. Ford 14031500 Tuffcut Gp 4 Flute Ball Nose End Mill 8.0mm pneumatic accessory
Four-flute ball-nose end mill in 8.0 mm diameter for contoured milling
- 4-flute ball nose design enables smooth contour milling
- 0 mm diameter suits precise profiling tasks
- TuffCut GP series built for general-purpose machining
- New condition ensures full cutting performance from first use
- California Proposition 65 warning indicates regulated chemical content
M.A. Ford 14031500 End Mill
The M.A. Ford 14031500 Tuffcut Gp is a four-flute ball nose end mill with an 8.0 mm cutting diameter. It is designed for machinists and CNC operators performing contouring and 3D profiling tasks in a workshop environment. This new accessory suits professionals needing a reliable rotary cutting tool for milling applications.
8.0 mm Ball Nose Profile
The defining specification is the 8.0 mm ball nose geometry combined with a four-flute design. This configuration determines the tool's ability to produce smooth radius finishes and complex contours in a single pass. Buyers who require a flat-bottom profile, a different cutting diameter, or a higher flute count for specific material removal rates should select an alternative tool.
Standard Shank Installation
Installation follows standard end mill procedures: secure the shank in a compatible collet or tool holder rated for the machine spindle. The most common issue is excessive tool deflection or chatter caused by improper clamping force or incorrect feed and speed parameters for the workpiece material. Verify holder runout before starting the operation.
Highlights
- 4-flute ball nose design enables smooth contour milling
- 0 mm diameter suits precise profiling tasks
- TuffCut GP series built for general-purpose machining
- New condition ensures full cutting performance from first use
- California Proposition 65 warning indicates regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 8.0 mm diameter mean when the end mill is in the spindle?
The 8.0 mm cutting diameter sets the width of each pass and determines the radius of the ball nose profile for 3D contouring.
What shank interface does the 14031500 use and what does it limit?
The tool uses a standard cylindrical shank that fits collets or end mill holders matching its shank diameter, limiting the maximum holder size you can use.
What physical clearance does the 4 flute ball nose cutter need to mount and cut?
The 8.0 mm diameter and flute length require a holder with matching bore and enough spindle clearance for the tool’s overall length to reach the workpiece.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
