M.A. Ford
M.A. Ford 14025000T Tuffcut GP 4 Flute Ball Nose End Mill 1/4 pneumatic accessory
A four-flute ball nose end mill in a quarter-inch size for contour milling
- 4-flute design enables smooth contour milling
- Ball nose geometry produces rounded profiles in pockets and slots
- 1/4 inch shank fits standard collets and holders
- TuffCut GP construction resists wear in general-purpose cutting
- California Prop 65 warning lists cancer and reproductive-harm chemicals
Product identity
The M.A. Ford 14025000T Tuffcut GP is a 4-flute ball-nose end mill supplied as a pneumatic accessory. It is intended for machinists and fabricators who need a general-purpose cutter for profiling and contouring operations. The tool is sold new and ships directly from the manufacturer. Buyers who require a different flute count, shank size or coating should look elsewhere.
Thermals noise and power
As a solid rotary cutter the end mill itself generates no noise and draws no electrical power. Heat is produced only at the cutting interface and is managed by the machine tool’s coolant or air-blast system. The accessory adds no thermal load to the pneumatic supply. No decibel or wattage figures apply to this item.
Build integration
The 1/4-inch shank fits standard collets and tool holders used on CNC mills and routers. No additional adapters or proprietary hardware are needed. Using this cutter frees up tool-changer slots that would otherwise be occupied by dedicated roughing or finishing tools. California Proposition 65 warnings note the presence of chemicals known to cause cancer and reproductive harm.
Highlights
- 4-flute design enables smooth contour milling
- Ball nose geometry produces rounded profiles in pockets and slots
- 1/4 inch shank fits standard collets and holders
- TuffCut GP construction resists wear in general-purpose cutting
- California Prop 65 warning lists cancer and reproductive-harm chemicals
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 1/4 ball nose end mill in my tool holder, and what step is often missed?
Insert the 1/4 shank fully into a compatible collet or chuck, tighten securely, and verify the flutes clear the workpiece — the step often missed is confirming full shank engagement before cutting.
What maintenance or replacement will the 4 flute ball nose end mill need later?
The 4 flute ball nose end mill will need resharpening or replacement once the cutting edges show wear, chipping, or loss of edge geometry from normal milling use.
What limit appears first on the 14025000T under sustained milling?
Heat buildup at the cutting edges is the first limit during sustained use, causing accelerated flank wear and reduced tool life if feed and speed are not managed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
